10 Printing Model: Workstation to print server.
Overview:
You need to be a superuser to use the following procedures. Run the 49XX setup utility to configure your Solaris 1.X / 2.X client to print to a remote 49XX printer. A remote print spooler is a Solaris 1.X / 2.X workstation that has been configured to be a remote spooler by the setup49XX configuration utility. SEE Chapter titledPrinting Model: Print Server to printer for this procedure. The 49XX remoter spooler spools jobs to a direct connected or network connected 49XX printer.
Setup:
NOTE: The following instructions assume you have correctly completed the XPrint 49XX PostScript Print Tool installation.
1.Become superuser. Run the 49XX printer setup utility.
2.From the directory into which you installed the XPrint Print Tool software, TYPE: /bin/setup49XX [ENTER]
NOTE: 49XX is model number for the printer model you are installing. For example, if you are installing XPrint 4920, then the setup command would besetup4920
XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION |
|