Xerox 701P91273 manual Setup XPrint49XX 1Add or Update a Printer, TYPE 1 ENTER

Page 26
Setup XPrint49XX

2.From the Setup XPrint49XX menu, select option1.

Setup XPrint49XX

1)Add or Update a Printer

2)Remove an existing printer.

e) Exit

Existing printer list:

Enter option:

TYPE: 1 [ENTER]

3.From the Add or Update a Printer menu, select option 2 until it indicates “workstation to print server”.

4.Enter a menu option number to toggle through the available settings. When the desired settings for all options are reached, apply the settings to the printer using the “ a “ option in the menu.

10-4

XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION

Image 26
Contents XPrint Color Series XPrint UNIX System Printer Driver InstallationSOLARIS 1.X SUN OS / SOLARIS Xerox Corporation Table of Contents XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION Page 4915 4920 4925 1 How to read this ManualFTP sites where this document is available ftp.xerox.com/pub/driversXPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION Overview 2 Quick Setup SOLARIS 1.X ,Setup Interface Guidesetup ENTER bar xvfp /dev/rfd0 ENTER XeroxInstall/setup ENTERcd /tmp ENTER cp /floppy/floppy0/setup . ENTER Solaris 1.X USERS3 Quick Setup NON SOLARIS UNIX 4.TYPE: ping <49XX_hostname> ENTERBerkeley BSD UNIX System 5 UNIXNetwork Install: Details in Chapter 4Installation Overview SOLARIS 1.X /2.XFloppy Disk Install: Details in Chapter XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION Assigning your XPrint printer a TCP/IP Address 6 TCP/IP XPrint printer ConfigurationDynamic default StaticXPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION 2.Run XPrint installation script 1Install Driver and Utilities cp /floppy/floppy0/setup . ENTER setup ENTERInstall Print Driver and Utilities cd /tmp ENTER volcheck ENTERcd <installation directory> ENTER setup ENTER Page 9 Printing Model: Workstation to printer 2.TYPE: /bin/setup49XX ENTER2.TYPE: 1 ENTER 10 Printing Model: Workstation to print server 10-3Setup XPrint49XX 1Add or Update a Printer TYPE 1 ENTER11 Printing Model: Print server to printer Setup2. From the Setup XPrint49XX menu, select option1 12 Removing a XPrint printer TYPE: 2 ENTER13 Administration AppleTalk Protocol SettingsTCP/IP NetBeuiEthernet NIC SettingsRead Only Settings TokenRingStarting TELNET from UNIX To Use TelnetThe Telnet Console Main Menu Starting TELNET from WINDOWS NTTYPE s ENTER Checking Printer StatusExample TYPE: ! ENTER TYPE: yes ENTER Remote 49XX NIC ConfigurationMaintenance mode example TYPE: yes ENTER Maintenance mode with HELP exampleTYPE: ! ENTER Telnet Menu System exploded Set primary NetWare server 1No 2Yes MAC XPrint Printer Services PC WIndows and MAC XPrint Printer ServicesPC WIndows XPrint Printer Services Page 14 Troubleshooting TCP/IP communication problemsIP address Subnet Mask Default Gateway 14-214-3 lpr and lp NON XPrint printing problems 14-415 APPENDICES FROM THE PRINTER’S CONTROL PANEL6.Press Enter while <IP ADDRESS> is displayed To change the settings, follow these steps Appendix C Setting up APPSOCKET<APPSOCKET> = <ENABLE> = <YES> <MODE> = <AUTOSELECT>15-4 15-5 Usage Appendix F XPrint UNIX Command Line Utilities XPQOverview xpq print_queue_name intervalXPRM xprm print_queue_name job_numberxpmv source_queue_name dest_queue_name XPMVxpmv source queue name dest queue name job number