Xerox 4400 manual Setting the printer driver for 2-sided printing

Specialty Printing

2.In the printer driver:

■ Select the tray containing the paper.

■

■

Select the orientation.

Select 2-sided printing. Refer to the table on page 18 for instructions and the wording used in the printer drivers.

3.Send the job to the printer.

Setting the printer driver for 2-sided printing

Operating System Driver Instructions

Macintosh		1.	From the File menu, select Print, and then select
LaserWriter 8.6 or			Layout.
LaserWriter 8.7		2.	Select Print on Both Sides.
		3.	Select a binding preference.
Windows 95,	PostScript	1.	From the File menu, select Print.
Windows 98, or	PCL5e	2.	Click the Properties button.
	PCL6
Windows Me
		3.	On the Setup tab, select Print on 2 Sides.
		4.	Check or uncheck Bind on Top Edge.
Windows 2000 or	PostScript	1.	From the File menu, select Print.
Windows XP	PCL5e	2.	Click the Properties button.
		3.	On the Layout tab under Print on Both Sides (Duplex),
			select either Flip on Long Edge or Flip on Short Edge.
Windows NT	PostScript	1.	From the File menu, select Print.
	PCL5e	2.	Click the Properties button.
		3.	On the Page Setup tab under Print on Both Sides
			(Duplex Printing), select either Long Side or Short
			Side.
Windows NT,	PCL6	1.	From the File menu, select Print.
Windows 2000, or		2.	Click the Properties button.
Windows XP
		3.	On the Setup tab, select Print on 2 Sides.
		4.	Check or uncheck Bind on Top Edge.

Phaser™ 4400 Laser Printer 18