Xerox 4090, 4050 manual

Printer components and options

4.Feeder tray indicator lights

5.Message display

6.Power on/off switch

7.Continue button

8.Stop button

9.Fault code display

10. Information button

Message display Shows printer status and simple operating and maintenance instructions in a two-line message display.

Graphic display Assists you in locating the area where the printer problem occurred, as indicated by the message in the message display.

Wire percentage Displays the percentage of stitcher wire remaining on the spool. indicator This indicator appears only if your printer has the stitcher/stacker

output configuration.

Message display Shows printer status and simple operating and maintenance instructions in a two-line message display.

Continue button Use the Continue button to resume printing.

While it is formatting a complex page, the printer controller may cycle down the printer if the page image is not available within a certain time frame. If this occurs, the following message appears:

Press <CONTINUE> to resume printing

You can ignore this message. As soon as the page image is available, the printer controller cycles up the printer and printing automatically resumes.

Graphic display Assists you in locating the area where the printer problem occurred, as indicated by the message in the message display.You can ignore this message. As soon as the page image is available, the printer controller cycles up the printer and printing automatically resumes.

Stop button Use the Stop button to interrupt printing.

3-4 System Overview Guide