Xerox 4050, 4090 manual Supplies, Paper and other throughput stocks, Selecting paper

A.Supplies

This appendix provides information and specifications for the media you use with your Xerox DocuPrint 4050/4090 NPS/IPS printer. Instructions for ordering supplies are also provided.

Consumable supplies (those that are depleted during operation of the system), such as paper, dry ink, developer, fuser lubricant, etc., must be ordered for your printer. It is important that an adequate supply of these items be on hand for installation, and that your supply be maintained afterwards.

Paper and other throughput stocks

The success of any print run is greatly dependent on the proper selection, care, and handling of the stock used.

Selecting paper

You need to select your paper carefully. If you do not use the proper paper, you increase the probability of paper jams and misfeeds. The stocks you use must meet the specifications set forth by Xerox for operability in the printer. For additional information about paper specifications, refer to Helpful Facts about Paper, delivered with your printer.

Acceptable paper Your DocuPrint 4050/4090 printer accepts the following standard stocks and sizes size cut-sheet papers:

•US Letter: 8.5 by 11 inches / 216 by 279 mm

•US Legal: 8.5 by 14 inches / 216 by 356 mm

•A4: 8.27 by 11.69 inches / 210 by 297 mm

System Overview Guide A-1