Xerox 4050, 4090 manual Other supplies

Supplies

The length of time you should condition your paper depends on the amount of paper and the difference between the storage and operating temperatures.

Use the following chart to determine the length of time needed to condition stacked cartons of paper.

NOTE: The numbers in the top two rows indicate the temperature difference between the storage area and the operating environment, not actual room temperatures.

Table 5-1. Paper conditioning: Recommended temperature differences between storage and operating areas

	Temperature differences between storage and
	operating areas
	Fahrenheit
	10o	15o	20o	25o	30o	40o	50o
	Centigrade
	5.5o	8.5o	11o	13o	17o	22o	28o
Cartons	Hours
1	4	8	11	14	17	24	34
5	5	9	12	15	18	25	35
10	8	14	18	22	27	38	51
20	11	16	23	28	35	48	67
40	14	19	26	32	38	54	75

Example: (See the shaded rows in the table above.) If you want to move ten cartons of paper from a storage area with a

temperature of 90 oF to an operating area with a temperature of

75 oF (a 15o difference), you should do so at least 14 hours before using the paper.

Other supplies

This section describes the supplies other than paper that are necessary for installation and afterward. Your sales representative will help you place your initial supply order.

System Overview Guide A-5