IPDS printing environment
Figure 5-2. Printing system: TCP/IP configuration
1.Host system (PC or mainframe)
2.Interface network (Ethernet or Token Ring)
3.Printer controller
4.Printer interface cables
5.Printer
For information on the various printer configuration options, refer to the “Printer components and options” chapter of this guide.
Channel interface —channel-attached systems only
Your system may use a channel interface board and connector box for channel connection to a host for IPDS printing. The channel interface board, connected to a channel cable connector box, handles all IPDS communications and handshaking with PSF on the host when the NPS/IPS is receiving data over a channel. (It is not used when the NPS/IPS is printing data using TCP/IP.)
System Overview Guide |