Stock Management and Calibration
Tips for use of Xerox Qualified Stocks
Here are some general tips for using Xerox Qualified Stocks:
•You are able to modify certain attributes of Xerox Qualified Stocks. Some fundamental attributes cannot be modified, as they affect color processing.
The fundamental attributes are:
–Name
–Color
–Weight
–Coating
–Type (Type, Opacity, Drilled, Modulus)
–Finish (iGen3 only)
–Color group
•Xerox Qualified Stocks cannot be moved from color group to color group. Only User Defined Stocks can be moved and fully edited at will.
Calibration process overview
Refer to the
Prior to initiating the calibration process, the stock you plan to use for calibration needs to be in a paper tray and that tray programmed for that stock.
Begin by calibrating the DTP41
NOTE: Calibrating the Spectrophotometer needs only be done once a day.
You need the reflective strip card that has the same serial number as the spectrophotometer. Follow the
In the DocuSP Color Manager: Associations window select a stock or color group representative. Open the Calibration Wizard and follow the
When calibration is complete, accept the calibration data. The calibration is now assigned to the stock or color group used for calibration.
Color Management Guide |