Xerox 7132 setup guide Network Scanning Setup Optional, Prerequisites for Network Scanning Setup

Page 7

Network Scanning Setup (Optional)

Network Scanning Setup (Optional)

Network scanning uses FTP or SMB protocols to transfer scanned documents on to a server or a client. Templates (scanned file properties) and repositories (destination folders) need to be set up to enable network scanning.

See also:

User Guide: Contains information on how to set up templates and repositories.

System Administrator Guide: Contains details about Network Scanning setup.

Prerequisites for Network Scanning Setup

Confirm that:

1.An existing operational network utilizing TCP/IP is available.

2.A repository (folder) exists on the FTP or SMB server to hold the scanned documents. A user account for the device must be created on the server that allows access to the repository folder.

Procedures for Network Scanning Setup

1.Power on the device.

2.Press Login/Logout, then type the UserID 11111 and press Confirm.

3.From the System Administrator menu, select System Settings.

4.Select System Settings.

5.Select Network Settings.

6.Select Port Settings.

7.Enable the following ports by highlighting each port and select Change Settings.

a.Internet Services (HTTP).

b.FTP Client Port or SMB Port (depending on which protocol is used).

c.SNMP Port.

d.SOAP Port.

8.Select Close several times then Exit. The device will reboot.

9.From a workstation, open up a web browser (such as Internet Explorer), and then enter the device's IP address in the format http://xxx.xxx.xxx.xxx (the xxx's represent the device's IP address). If connected properly, you should see a CentreWare Internet Services web page for your device.

10.Create a Repository setting.

a.Select the Print/Scan Services tab.

b.Select Job Templates.

c.Select the Display Job Template Screen button.

d.Select File Repository Setup.

e.Enter the appropriate information to name this repository setting and provide a path to the repository folder previously created on the FTP or SMB server. The Port setting can be left blank. (For Anonymous FTP, a value must be entered in the password field).

Copyright © 2006, Xerox Corporation. All rights reserved.

7

Image 7
Contents Install the Scan to Email Option on the WorkCentre Quick Scan Features Setup GuideProcedure for Scan to Email Setup Prerequisites for Scan to Email SetupClick on Machine Details Click the Protocols Settings folderClick on Apply New Settings Click on Apply New Settings Click on Reboot MachineSymptom Possible Cause Resolution/Validation Scan to Email TroubleshootingPrerequisites for Scan to Mailbox Setup Scan to Mailbox Setup OptionalSelect Mailbox Name and press Change Settings Select Document List Procedure for Scanning to MailboxPrerequisites for Network Scanning Setup Network Scanning Setup OptionalProcedures for Network Scanning Setup Select Create New Procedure for Network ScanningPrerequisites for Scan to FTP/SMB Procedure for Scan to FTP/SMBSelect All Services Scan to FTP/SMB OptionalScan to FTP/SMB Optional