When all required search criteria has been entered, highlight [START SEARCH], then press ENTER. The Archive Search Results window will appear.
ARCHIVE SEARCH RESULTS
| START DATE | START TIME | SIZE (MB) | |
000 | 11/28/00 | 17:52:14 | 26842 | [ ] |
001 | 11/29/00 | 9:35:20 | 2062 | [ ] |
002 | 11/29/00 | 10:00:04 | 278 [X] | |
003 | 11/29/00 | 10:03:25 | 66 [X] | |
| SELECTED [ | 383 ](MB) |
AVAILABLE ON TARGET MEDIUM [ | 652 ](MB) | |
|
|
|
"ENTER" TO PLAY | "SEARCH" TO ARCHIVE |
|
Use the Left/Right Arrows to navigate the Search Results menu, highlighting the recorded event you wish to select. Use the Up/Down Arrows to select a recorded event by placing [X] in the check box.
ARCHIVING...
[CANCEL]
To begin archiving the selected event(s), press SEARCH. The Archiving progress bar will appear. Press ENTER to cancel archiving at any time.
When the unit has finished archiving, the Archiving Completed message will appear. Press ENTER to acknowledge the message and complete the archiving process.
Main Menu ➝ Archive Setup ➝ Restore From Archive
MESSAGE
ARCHIVING COMPLETED
[OK]
This menu is used to either play back archived video from a disk array archive, or restore the video to the DVR1’s hard drive.
NOTE: If video was archived on a
The Restore Search Filters menu functions similar to the Archive Search Filters menu (as described previously). When the search completes, a Restore Search Results menu appears.
RESTORE SEARCH FILTERS
| START |
|
|
|
| STOP |
| |||
DATE: 12/25/00 | [ ] | 01/01/01 | [ ] | |||||||
(MM/DD/YY) |
|
| (MM/DD/YY) | |||||||
|
|
|
|
|
|
|
| |||
| START |
|
|
|
| STOP |
| |||
TIME: 11:11:21 | [ ] | 12:34:34 | [ ] | |||||||
|
|
|
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
|
|
CAMERA: [ ][ ][ ][ ][ ][ ][ ][ ] |
| |||||||||
|
|
|
|
|
|
| ||||
ALARM: [ ] |
|
|
|
|
|
| ||||
|
|
|
|
|
|
| ||||
|
|
| [CANCEL] |
|
|
| ||||
|
|
| [START SEARCH] |
| ||||||
Main Menu ➝ Archive Setup ➝ Background Archive
This archive feature enables automatic and continuous archiving in the background while other system operations continue (i.e., all information going to the DVR1 hard drive is continuously sent to the DVAA Series Disk Array). If this mode is enabled, the archive device must provide the required data transfer and storage capacity.
NOTE: Background Archiving should never be used with
Main Menu ➝ Archive Setup ➝ Archive Overwrite Mode
This setting determines what happens when the archive device is full. The three options are: Write once, No overwrite, and Continuous.
18
