SECTION 5: DVR1 ADVANCED MENU PROGRAMMING
5.1Overview of the DVR1 Advanced Menu
Enhanced DVR1 operating features are programmed via the Advanced Menu. The following table provides a summary of these actions that are accessed via the DVR1 Advanced Menu.
| User Action | Corresponding Menu | |
| Overwrite the Hard Disk | DISK OVERWRITE MODE |
|
| Erase, Delete, and Recover Hard Disk Data | DISK MAINTENANCE |
|
| Invoke Audio Recording | AUDIO RECORD SETTING |
|
| Use the Auto Delete Feature | AUTO DELETE MODE |
|
| Configure Communications | COMMUNICATIONS |
|
| Configure Multiplexer Format | MULTIPLEXER FORMAT |
|
| Adjust Picture Qualities | ADJUST PICTURE |
|
| Lock Out the Front Panel | FRONT PANEL LOCK |
|
| Restore Factory Defaults | FACTORY SETTINGS |
|
| Change the Password | CHANGE PASSWORD |
|
Press MENU to enter the DVR1 Main Menu. Use the Left/Right Arrows to highlight the ADVANCED MENU title and press ENTER. The Advanced Menu (shown below) appears.
DISK OVERWRITE MODE
DISK MAINTENANCE
AUDIO RECORD SETTING
AUTO DELETE MODE
COMMUNICATIONS
MULTIPLEXER FORMAT
ADJUST PICTURE
FRONT PANEL LOCK
FACTORY SETTINGS
CHANGE PASSWORD
IMPORTANT NOTE: Please review the information in Section 3 regarding navigation through the DVR1 menus. Advanced Menu programming should be designated to qualified systems personnel only.
5.2DVR1 Passwords
The DVR1 Series is equipped with two (2) passwords.
The first password provides access to the DVR1’s Advanced Menu. This password can be changed by the System Administrator to prevent unauthorized access to the Advanced Menu functions. Store the password in a secure location. The default password for the Advanced Menu is 0000, as stated in Section 5.11. The second password is used to set the DVR1 to its original factory default settings. This password cannot be altered and is set (permanently) at 0000.
Accessing the Advanced Menu Using the Password
1.Select ADVANCED MENU from the Main Menu, then press ENTER. The Password Box appears.
2.Enter the Advanced Menu password. Use the Up/Down Arrows to select a character, then press ENTER to move to the next character.
PASSWORD BOX
PLEASE ENTER THE PASSWORD!
– – – –
3.Pressing ENTER on the last character completes password entry. If the password was correctly entered, the Advanced Menu is displayed.
20
