Philips DVR1EP16 Navigating with the DVR1 Controls, Main Menu Record Settings Normal Record Speed

3.3Navigating with the DVR1 Controls

Navigating and entering parameter values with the DVR1 controls are designed to be easy and intuitive. Most menus use the same navigation for programming operations.

Pull-down Menus

Pull-downmenus are the top-level menus, and are accessed by pressing MENU. For example, the following DVR1 Main Menu is a pull-down menu.

TIME/DATE

ALARMS

TIMER SETTINGS

RECORD SETTINGS

DISPLAY SETTINGS

ARCHIVE SETUP

ADVANCED MENU

ABOUT DSR

•Use the Left/Right Arrows to scroll through the items or fields shown in a menu. When the desired item is highlighted, press ENTER to select that item.

•Choosing an item from a pull-down menu typically leads to a sub-menu (i.e., a pop-upmenu). Changes to operating parameters are usually made in pop-up menus.

•To exit the program menu or menu level (after all parameter changes have been made), press MENU.

Pop-up Menus

Pop-upmenus usually have a parameter(s) from which you can select or change the value. A sample pop-up menu is shown below.

DATE FORMAT SETUP

SELECT FORMAT

MM/DD/YY

•Use the Left/Right Arrows to move between fields in the menu.

•Press ENTER to select any item.

•Use the Up/Down Arrows to scroll through the values of that particular parameter.

•To save changes and exit the pop-up menu: select [OK] and/or press ENTER.

•To exit the menu without making changes: press MENU or select [CANCEL], and press ENTER.

Programming Notations in this Manual

Throughout the programming sections in this manual, programming instructions appear in special subheadings, as in the following example:

Main Menu ➝ Record Settings ➝ Normal Record Speed

Meaning: At the Main Menu, select RECORD SETTINGS, then ENTER. This opens another menu. In this menu, select NORMAL RECORD SPEED, then press ENTER. A pop-up menu will appear.

On-screen Representations

On-screen representations are shown in this manual as follows (note the distinction between items that appear highlighted on-screen and those that do not):

Not highlighted: Highlighted:

TIME/DATE

TIME/DATE

14