29EN
Disc
Management Recording PlaybackIntroduction Connections Basic Setup Editing Function Setup VCR Function Others

SETTING THE CLOCK

Auto Clock Setting

This unit can set the time and date automatically by
referring to a channel that carries a clock information. If a
PBS (public broadcasting station) is available in your area,
follow “Auto Clock Setting” on this page. If not, follow
“Manual Clock Setting” on page 30.
Make sure
• The antenna/cable TV connections are correct.
• Channels are set. (Refer to pages 27-28.)
Note for auto clock setting
• The unit receives the clock data at 12:00 a.m/p.m
when the power is off.
• The clock may set itself automatically after this unit
receive the antenna/cable signal and plug in the
power cord.
• If the clock is not set correctly, timer recording does
not work properly.
SE-R0297
OPEN/
CLOSE
INPUT
SELECT HDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
JKL MNO
DEF
ENTER
INSTANT
SKIP
PLAY
DVDVCR
PAUSE
REV
SKIP
STOP
SKIP
FWD
1.3x/0.8x
PLAY
TIME SLIP
TIMER SET ZOOMSEARCHREPEAT
RECREC MODEDUBBING
CH
ENTER
GHI
PQRS TUV
SPACE
WXYZ
JKL MNO
.@/: ABC DEF
SETUP
1 Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
2 Use [K / L] to select “Clock”, then
press [ENTER].
“Clock” menu will appear.
3 Use [K / L] to select “Auto Clock
Setting”, then press [ENTER].
4 Use [K / L] to select “Auto”, then
press [ENTER].
Auto Clock Setting
OFF
Auto
Manual
5 Press [SETUP] to exit.
6 Press [I/
y
y ON/STANDBY] to turn off
the unit.
This unit will search for the time only when the
power is off. Leave it off for at least 15 minutes
to give this unit time to set the clock.
Manual Auto Clock Setting
If the unit chooses an incorrect PBS channel, set the PBS
channel manually by following the steps below.
1 Select “Manual” at step 4, then press
[ENTER].
2 Use [the Number buttons] or [K / L]
to enter your PBS channel number,
then press [ENTER].
Set Channel No.
CH 1
3 Press [SETUP] to exit and turn off the
unit.