Toshiba D-VR7KC2 Basic Recording & ONE-TOUCH Timer Recording, Press REC I to start recording

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

6	Press [REC I] to start recording.	7
	“I” will be displayed for 5 seconds.

ISP 1:53

Press [PAUSE F] to pause recording.

Press [PAUSE F] or [REC I] again to restart recording.

To set one-touch timer recording (OTR)...

This is a simple way to set the recording time in blocks of 30 minutes.

Press [REC I] repeatedly until the desired recording time (30 minutes to 8 hours) appears on the TV screen. One-touch timer recording will start.

I0:30

0:30

(normal recording) 1:00

Press [STOP C] to stop recording.

The recorded title will be included in the title list. (Refer to “Guide to a Title List” on page 70.)

Wait for a moment 90%

This operation may take awhile to be completed.

8:00 7:30

•To change the recording length during one-touch timer recording, press [REC I] repeatedly until the desired length appears.

•To cancel one-touch timer recording within the specified time, press [STOP C].

Note

•When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.

•When the unit clock has not been set, the space for a date and time of title names will be blank.

•When you record a TV program onto DVD-RW, DVD-R or DVD+RW/+R, you have to select the TV channel audio beforehand. Only the selected channel audio will be recorded. Refer to “SELECTING TV AUDIO” on page 31 for more details.

•You cannot change the recording mode during the recording pause mode.

•You can change a channel to be recorded during the recording pause mode.

Note for one-touch timer recording

•The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press [DISPLAY] to see it on the TV screen.

•Unlike the timer recording, you can perform the following operations during one-touch timer recording.

-Turning the unit into the standby mode (One-touch timer recording will be canceled.).

-Using [REC I] or [STOP C] on the remote control.

•You cannot use the pause function during one-touch timer recording.

•If DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode and the VCR keeps the current mode.

•When one-touch timer recording is finished and the power is turned into the standby mode, the unit will switch to the timer-standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby mode to use the unit continuously.

42 EN

E9PG0CD_DVR7KC2_EN_v1.indd 42

2009/07/23 14:38:41