Toshiba D-VR7KC2 owner manual Precautions, To Avoid the Hazards of Electrical Shock and Fire

PRECAUTIONS

This Class B digital apparatus complies with Canadian ICES-003.

Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.

LASER SAFETY

This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this apparatus, due to possible eye injury.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.

LOCATION: Inside, near the deck mechanism.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.

Disc

Introduction Connections Basic Setup Management

To Avoid the Hazards of Electrical Shock and Fire

•Do not handle the power cord with wet hands.

•Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.

•Do not put your fingers or objects into the unit.

Location and Handling

•Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.

•Avoid a place with drastic temperature changes.

•Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit. Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit.

•Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.

•Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.

EN 3

Recording Playback Editing Function Setup VCR Function Others

E9PG0CD_DVR7KC2_EN_v1.indd 3

2009/07/23 14:37:14