Toshiba D-VR7KC2 owner manual Settings for AN External Device, Recording from an External Device

awhile to be completed.

This operation may take

4

Press [I REC] on the unit to start recording.

5

6 Start playback on the external device to record from.

7 Press [STOP C] / [EJECT/STOPA/ C] on the unit to stop recording.

Press [REC MODE] repeatedly to select a recording mode.

Refer to “Recording Mode” on page 38 for DVD or “Recording” on page 97 for VCR.

SETTINGS FOR AN EXTERNAL DEVICE

Recording from an External Device

Before recording from an external device, refer to the				Turn on the TV and press
				[I/y ON/STANDBY], and be sure to
instructions for the connection on page 47.
				1 select the input of the TV to which
				the unit is connected.
OPEN/	INPUT	HDMI
CLOSE	SELECT			When you want to record to the disc:
.@/:	ABC	DEF		Press [DVD].
GHI	JKL	MNO	CH	2 Press [OPEN/CLOSE A] to open the disc
				tray. Place the disc to record properly.
PQRS	TUV	WXYZ		Press [OPEN/CLOSE A] again to close
			TIMER	the disc tray.
	SPACE
			PROG.	It takes awhile to load
	SETUP	DISPLAY	AUDIO	the disc.
DISC MENU		TOP MENU		When you want to record to a
				cassette tape:
				Press [VCR].
	ENTER			Insert the cassette tape with an
CLEAR			RETURN	erase-protection tab into the cassette
	INSTANT	1.3x/0.8x		compartment.
			TIME SLIP
	SKIP	PLAY
REV	PLAY		FWD	Select the input of the unit which the
				external device is connected. (L1 or
SKIP	STOP		SKIP	3 L2)
				• To use the input jacks on the rear of this unit;
PAUSE		VCR	DVD	Select “L1 (Rear)” by using [INPUT SELECT ]
	REC MODE			or [CH / ].
DUBBING			REC	• To use the input jacks on the front of this unit;
REPEAT TIMER SET SEARCH			ZOOM	Select “L2 (Front)” by using
				[INPUT SELECT ] or [CH / ].
				• You can also select “L1 (Rear)” or “L2 (Front)” by
				using [the Number buttons].
				- For L1, press [0], [0], [1].
1	7	5		- For L2, press [0], [0], [2].

2 7 5

48 EN

E9PG0CD_DVR7KC2_EN_v1.indd 48

2009/07/23 14:38:50