Xerox BHWM 129 instruction

The machine is noisy.

The machine wont spin properly.

The machine leaks from the dispenser.

The machine leaks (other than dispenser) .

The indicator lights on the console are flashing rapidly.

The machine smells.

The machine door cannot be opened .

Door Seal damaged at the bottom .

The water level is too low when the machine is washing.

There is too much foam.

After completing the programme, or before starting a programme, the machine has turned itself off (no lights).

General .

•There will always be some motor, pump and drum noise during spin.

•Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly. This is a safety feature to prevent damage. Out of Balance can be caused by washing a single heavy item (eg duvet, quilt, etc). - Try the programme again using a different load.

•The dispenser drawer is blocked with detergent and requires cleaning.

•The water pressure is too high and requires turning down - turn down the tap on the water supply pipe slightly and try again.

•The machine is tilting forwards - It must be level when in its final position.

•The fill hose is loose, check both the cabinet and tap ends.

•The fill hose is tight but still leaks, if so replace the rubber washers, or the fill hose is missing the rubber washer.

•The drain hose is not fixed in properly.

•Switch off the machine and unplug it, wait for approximately 1 minute and then switch it back on again If the problem persists contact the Technical Assistance Service.

•The machine requires a service wash. Run a 90 degree wash cycle with detergent and no laundry.

•The door will not open until the door lock indicator light goes out shortly after the program has finished.

•The door seal has drainage holes at the bottom - This is normal.

•The water level is correct if it can be seen at the bottom of the door

•The detergent is not suitable for machine washing (it should display the text 'for washing machines' or 'hand and machine wash' or the like).

•To comply with new energy saving regulations the machine is fitted with an automatic standby system. Press 'ON/OFF' button for 3 seconds to activate the machine, it can then either be switched off or a new programme selected.

•Your washing machine contains sensors that monitor progress during the wash cycle (eg: Water Levels, Temperatures, Out of Balance loads, Wash time/progress). Normally, if your machine successfully completes the cycle, there is unlikely to be anything wrong!

Remember, you will be charged for a service call for problems caused by incorrect installation, as listed above.

Not emptying contents from pockets may cause pump or drain blockages, or may damage the machine.

Do not wash items which do not have a wash label, or wash items that are not intended as machine washable.

BHWM 129 specifications

The Xerox BHWM 129 is a compact, multifunctional black-and-white printer designed to meet the needs of small to medium-sized businesses. Combining efficiency, reliability, and advanced features, the BHWM 129 stands out in today’s competitive market for office equipment.

One of the main features of the BHWM 129 is its exceptional printing speed. With the ability to produce up to 29 pages per minute (ppm), it ensures that users can handle high-volume print jobs without significant delays. This speed is complemented by a first-page-out time of just 6.5 seconds, allowing users to get their documents quickly and efficiently.

The BHWM 129 utilizes advanced laser printing technology, providing high-quality text and graphics. It boasts a print resolution of up to 1200 x 1200 dpi, ensuring sharp and clear documents that are suitable for professional presentations. The printer also supports a variety of media sizes and types, including envelopes, labels, and cardstock, making it versatile for different office needs.

In addition to its impressive printing capabilities, the BHWM 129 offers comprehensive multifunction features. It combines printing, scanning, copying, and faxing functions into one compact device, saving valuable office space and resources. The flatbed scanner allows for scanning and copying of various document sizes, while the automatic document feeder (ADF) enhances productivity by accommodating multiple pages for quick duplication or faxing.

Another characteristic of the BHWM 129 is its user-friendly interface. The intuitive control panel with a digital display enables easy navigation through the printer’s functions. Moreover, it features connectivity options, including USB and network capabilities, allowing users to integrate the printer seamlessly into their existing office network. With wireless connectivity, users can print directly from their mobile devices, enhancing convenience and flexibility.

The Xerox BHWM 129 also prioritizes sustainability. It is designed with energy-efficient features, including low power consumption during idle times and the use of recyclable materials in its design. This commitment to environmental responsibility makes it an appealing choice for companies looking to reduce their ecological footprint while enjoying high-quality printing solutions.

Overall, the Xerox BHWM 129 represents an ideal choice for businesses seeking an efficient, multifunctional printing solution. With its combination of speed, quality, and advanced features, it is well-equipped to handle the diverse printing and documentation needs of today's dynamic work environments.