Xerox 510DP manual Control panel

PRINTER OVERVIEW

Control panel

The control panel is located on top of the front side of the printer. It consists of a graphic display, a message display, several function keys, and a numeric keypad.

1

3

4

2

1.Graphic display

2.Media key

3.Message display

4.Previous key

5.Next key

6.Enter key

7.Exit key

10

5	6	7	8
			9

This is an illustration of the printer with indicator lights for the front door, the cutter drawer, the toner supply access cover, the cut sheet feed-in shelf, drawer 1, drawer 2, and drawer 3. The indicator lights have three states. "Off" is the normal state and signifies that no operator attention is required. "On" signifies that the associated interlock is open. "Flashing" signifies that operator attention is required.

Press this key to display and modify the current width (if applicable) and type settings for the media sources (drawer 1, drawer 2, drawer 3, and cut sheet feed-in shelf). This key is active from both on-line and off-line modes. Pressing this key while in off-line mode always displays the media settings regardless of which off-line menu is currently active.

This is a 2-line, 40-character-per-line display.

Press this key to move backward through the printer menus and selections. For numeric values, pressing this key decreases the value by one unit.

Press this key to move forward through the printer menus and selections. For numeric values, pressing this key increases the value by one unit.

Press this key to select the current menu item or value.

Press this key to undo the previous selection or to return to the next higher menu level. If you have modified a parameter, the parameter will remain unchanged.

4 XEROX Wide Format 510dp OPERATOR MANUAL