Agilent Technologies 82357B Installing Agilent IO Libraries Suite, Insert the Automation-Ready CD

Page 8

82357B USB/GPIB Interface

2. Installing Agilent IO Libraries Suite

2. Installing Agilent IO Libraries Suite

Insert the Automation-Ready CD

Turn on your PC and insert the Agilent Automation- Ready CD with Agilent IO Libraries Suite into the CD-ROM drive. If the auto-run window does not appear automatically, go to Start >

Run then type <drive>:autorun\auto.exe, where

<drive> is your CD drive letter.

Install the IO Libraries Suite

• See the 82357B User’s Guide for the full IO Libraries Suite

N O T E

installation procedures.

•You are recommended to install the latest version of IO Libraries Suite. You can download the latest version of IO Libraries Suite from the following site: http://www.agilent.com/find/iosuite

When the Agilent IO Libraries Suite window appears, follow the on-screen instructions to install the IO Libraries Suite.

82357B Quick Start Guide

3

Page 7 Page 9
Image 8
Page 7 Page 9
Contents USB/GPIB Manual Part Number Safety Symbols Regulatory Markings Relevant European Legal DirectivesAdditional Safety Information Table of Contents Introduction Check your PC operating system Before You Install the 82357BCheck your shipment items Insert the Automation-Ready CD Installing Agilent IO Libraries SuiteInstall the IO Libraries Suite Look for circled IO icon Upgrading your IO Libraries versionObserve the 82357B LEDs Connecting the 82357BPlug the 82357B into a USB Port Observe the Agilent Connection Expert Configuring the 82357BConfigure the 82357B Connecting Gpib Instruments Connect the 82357B to Gpib instrumentsProgramming via the 82357B Program the Gpib instruments optionalContacting Agilent Other ReferencesRelated documentation 82357B USB/GPIB Interface Contact us
Top Page Image Contents