Agilent Technologies 82357B Look for circled IO icon, Upgrading your IO Libraries version

Page 9

82357B USB/GPIB Interface

2. Installing Agilent IO Libraries Suite

N O T E

Upgrading your IO Libraries version

If you are upgrading to the latest version of the IO Libraries Suite from a previous version of the IO Libraries, you must remove the following instruments and interfaces listed below before you upgrade your software. This step is necessary in order for these devices to obtain the correct drivers to work with Agilent IO Libraries.

•Disconnect any USB instruments from your PC.

•Disconnect any Agilent 82357B USB/GPIB Interface con- verters from your PC.

•Disconnect any Agilent E8491 IEEE 1394 PC Link to VXI interfaces from your PC.

Look for circled IO icon

After the libraries are installed, an IO icon is displayed on the Windows task bar on the bottom-right corner of the screen. You can click the icon to manually run the IO configuration util- ities and to display the online documentation. It is not neces- sary to use the icon at this time.

4

82357B Quick Start Guide

Page 8 Page 10
Image 9
Page 8 Page 10
Contents USB/GPIB Manual Part Number Relevant European Legal Directives Safety Symbols Regulatory MarkingsAdditional Safety Information Table of Contents Introduction Before You Install the 82357B Check your shipment itemsCheck your PC operating system Installing Agilent IO Libraries Suite Install the IO Libraries SuiteInsert the Automation-Ready CD Upgrading your IO Libraries version Look for circled IO iconConnecting the 82357B Plug the 82357B into a USB PortObserve the 82357B LEDs Configuring the 82357B Configure the 82357BObserve the Agilent Connection Expert Connect the 82357B to Gpib instruments Connecting Gpib InstrumentsProgram the Gpib instruments optional Programming via the 82357BOther References Related documentationContacting Agilent 82357B USB/GPIB Interface Contact us
Top Page Image Contents