Be sure to Turn the Printer OFF before, Windows

6 Install the Printer Driver (Windows®)

6 Install the Printer Driver (Macintosh®)

7 Align the Print Head

Windows

1 Be sure to TURN THE PRINTER OFF before		5 When the Printer Port window appears,
continuing.		TURN THE PRINTER ON so the printer port
POWER	POWER	(connection) can be automatically detected.
POWER	POWER
Lamp	Button

Macintosh

IMPORTANT: Drivers that ship with this printer support Mac® OS 8.6-9.X. For Mac OS X driver and instructions, go to our Web site at www.canontechsupport.com.

1Turn on your Mac and insert the “S830D Setup Software & User’s Guide” CD-ROM.

2Open the Printer Driver folder on the CD-ROM, then double-click the Installer icon.

7After the computer restarts, TURN THE PRINTER ON. Select the Apple menu, then Chooser.

Before using the printer, align the print head to ensure the best quality printing.

1Add a stack of blank paper to the sheet feeder.

2Start the alignment procedure.

Windows:

a. For Windows XP, select Start, then Control

Panel. Then click on Printers and Other

Hardware, then Printers and Faxes.

NOTE: For other Windows versions, click

Start, then Settings, then Printers.

NOTE: For Windows® XP or Windows 2000, log on to Windows as a member of the Administrators group before continuing.

IMPORTANT: If you see the Add New Hardware Wizard, click Cancel.

2Close any open software applications, then insert the “S830D Setup Software & User’s Guide” CD-ROM. The setup program should run automatically.

NOTE: If the setup program does not run,

click Start, then Run, then type D:\msetup.exe, where D is your CD-ROM drive.

3Read the License Agreement, then click Yes, if you agree.

4When the main menu appears, make sure that the Printer Driver is selected, then click Install.

NOTE: If you are prompted to restart Windows, remove the CD-ROM, then click OK. After the computer restarts, insert the CD-ROM and continue.

The software will begin identifying the printer port being used.

IMPORTANT: If your computer cannot detect a printer port, refer to the Troubleshooting chapter in the “S830D Quick Start Guide” for instructions.

6When the Terminate Installation window appears, click OK.

7Follow the on-screen instructions to continue with Product Registration.

NOTE: Remember to register your product

to ensure product support. The serial number is located on the inside of the printer, to the right of the print head.

8When the main menu appears, make sure that Other Driver is selected, then click Install.

9After installing the Other Driver successfully, continue by making sure that Application is selected, then click Install.

10When the Terminate Installation window appears, click OK, then Exit.

NOTE: For more information. refer to the “S830D Quick Start Guide” or view the electronic documentation on the CD-ROM.

11Click Yes if you are prompted to restart your computer

12To ensure highest quality output, continue with Step 7 Align the Print Head.

3Read the License Agreement and click Accept, if you agree.

4Click Install. The printer driver will load automatically.

5If the message “No other applications can be running…” displays, click Continue.

6When the “Installation was successful” screen displays, Restart your computer.

NOTE: Register your product to ensure product support. The serial number is located on the inside of the printer, to the right of the print head.

8Click the S830D icon in the Chooser. The printer name will highlight and move to the right panel.

NOTE: To use the BJ Print Monitor, click the Backgrounding button to the On position.

9Close the Chooser.

10Access your “S830D Setup Software & User’s Guide” CD-ROM again. Open the Memory Card Utility folder and double-click the BJ Installer icon.

11Follow the on-screen instructions. When the “Installation is completed” screen appears, you can choose to Restart Now, or click Quit, and access your CD-ROM again.

12From the Application folder, double-click on the software to be installed.

13Follow the on-screen instructions. When the “Installation has Finished” screen appears, click OK.

NOTE: For more information, refer to the “S830D Quick Start Guide” or view the electronic documentation on the CD-ROM.

14When prompted, restart your computer.

15To ensure highest quality output, continue with Step 7 Align the Print Head.

b. Right-click the Canon S830D icon, then

click Properties.

c. Click the Maintenance tab, then click the

Print Head Alignment icon.

Macintosh:

a.From the File menu in a software application, click Page Setup.

b.Click the Utilities button.

c.Click the down-arrow to select Test Print.

d.Click the Print Head Alignment icon.

3Click Yes (Windows) or OK (Macintosh) when prompted if the pattern printed successfully.

4Compare the different patterns for each color on the printout:

5For each color on the test printout, enter the number in the Print Head Alignment window that corresponds with the smoothest looking test pattern.

6Click OK (Windows) or Send (Macintosh) when finished.

Canon is a registered trademark of Canon Inc. CompactFlash is a trademark of SanDisk Corporation.

All other products and brand names are registered trademarks or trademarks of their respective owners.

Specifications subject to change without notice. Printed in Thailand 40-42249-0402

1 Be sure to TURN THE PRINTER OFF before

continuing.

TURN THE PRINTER ON so the printer port