Juniper Networks manual Parts Inventory Packing List for an EX8208 Switch

Complete Hardware Guide for EX8208 Ethernet Switches

Parts Inventory (Packing List) for an EX8208 Switch

The switch shipment includes a packing list. Check the parts you receive in the switch shipping crate against the items on the packing list. The packing list specifies the part number and description of each part in your order. The parts shipped depend on the configuration you order. See “EX8208 Switch Configurations” on page 6 for more information.

If any part on the packing list is missing, contact your customer service representative or contact Juniper customer care from within the U.S. or Canada by telephone at 1–800–638–8296. For international-dial or direct-dial options in countries without toll-free numbers, see http://www.juniper.net/support/requesting-support.html.

NOTE: All line cards ordered are shipped separately. Line cards are not listed on the switch’s packing list.

NOTE: The base configuration is available only with AC power supplies. The redundant configuration ships with either AC or DC power supplies.

Table 52 on page 130 lists the parts and their quantities in the packing list for a base configuration and a redundant configuration switch.

Table 52: Parts List for Different EX8208 Switch Configurations

Component	Base Configuration Quantity	Redundant Configuration Quantity
Chassis, including the backplane and	1	1
front-mounting brackets
Switch Fabric and Routing Engine (SRE)	1	2
module
Switch Fabric (SF) module	1	1
Power supplies	2 AC	6 AC or 4 DC
Power supply cords	2 (1 per power supply)	6 (1 per AC power supply)
Fan tray	1	1
Cover panels for slots without installed	• Line card cover panels: 8	• Line card cover panels: 8
components	• SRE module cover panel: 1
	• Power supply cover panels: 4

Table 53 on page 131 lists the parts contained in the accessory box. The same accessories ship with both configurations of the switch.

130 Copyright © 2010, Juniper Networks, Inc.