Juniper Networks EX8208 manual Management Port LEDs in EX8200 Switches

Chapter 2: Component Descriptions

Table 10: SRE Module LEDs of an EX8208 Switch (continued)

LED Label (Description)	Color	State and Description
MS (Master)	Green	• On steadily—SRE module is the master.

•Blinking—SRE module is in standby mode.

	Unlit	SRE module is powered off.
SF (Switch Fabric)	Green	• On steadily—Switch fabric in the SRE module is operating
		normally.
		• Blinking—Switch fabric in the SRE module is in standby mode.
	Yellow	Switch fabric in the SRE module has failed.
	Unlit	SRE module is powered off.

Related Topics • Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch on page 24

•Installing an SRE Module in an EX8208 Switch on page 155

•Removing an SRE Module from an EX8208 Switch on page 215

•Taking the SRE Module Offline in an EX8208 Switch on page 213

Management Port LEDs in EX8200 Switches

The management port on EX8200 switches has two LEDs that indicate link/activity and port status (see Figure 9 on page 27). The management port is set to full-duplex and the speed is set to 100 Mbps.

Figure 9: LEDs on the Management Port on an EX8200 Switch

Table 11 on page 28 describes the Link/Activity LED.

Copyright © 2010, Juniper Networks, Inc. 27