CHAPTER 20

Power and Electrical Safety Information

General Electrical Safety Guidelines and Warnings for EX Series Switches on page 291

Prevention of Electrostatic Discharge Damage on EX Series Switches on page 292

AC Power Electrical Safety Guidelines for EX Series Switches on page 294

AC Power Disconnection Warning for EX Series Switches on page 295

DC Power Electrical Safety Guidelines for EX Series Switches on page 296

DC Power Disconnection Warning for EX Series Switches on page 297

DC Power Grounding Requirements and Warning for EX Series Switches on page 298

DC Power Wiring Sequence Warning for EX Series Switches on page 299

DC Power Wiring Terminations Warning for EX Series Switches on page 301

Multiple Power Supplies Disconnection Warning for EX Series Switches on page 302

TN Power Warning for EX Series Switches on page 302

In Case of Electrical Accident: Action to Take on an EX Series Switch on page 303

General Electrical Safety Guidelines and Warnings for EX Series Switches

WARNING: Certain ports on the switch are designed for use as intrabuilding (within-the-building) interfaces only (Type 2 or Type 4 ports as described in GR-1089-CORE, Issue 4) and require isolation from the exposed outside plant (OSP) cabling. To comply with NEBS requirements and protect against lightning surges and commercial power disturbances, the intrabuilding ports must not be metallically connected to interfaces that connect to the OSP or its wiring. The intrabuilding ports on the switch are suitable for connection to intrabuilding or unexposed wiring or cabling only. The addition of primary protectors is not sufficient protection for connecting these interfaces metallically to OSP wiring.

CAUTION: Before removing or installing components of a switch, attach an ESD strap to an ESD point and place the other end of the strap around your bare wrist. Failure to use an ESD strap could result in damage to the switch.

Copyright © 2010, Juniper Networks, Inc.

291

Page 317
Image 317
Juniper Networks EX8208 manual Power and Electrical Safety Information