Complete Hardware Guide for EX8208 Ethernet Switches

Cabinet Requirements and Specifications for an EX8208 Switch

You can mount an EX8208 switch on a cabinet that contains a 19-in. rack as defined in Cabinets, Racks, Panels, and Associated Equipment (document number EIA-310-D) published by the Electronics Industry Association (http://www.eia.org).

Cabinet requirements consist of:

Cabinet size and clearance

Cabinet airflow requirements

Table 40 on page 100 summarizes cabinet requirements and specifications for EX8208 switches.

Table 40: Cabinet Requirements and Specifications for an EX8208 Switch

Cabinet Requirement

Guidelines for the EX8208 Switch

Cabinet size and clearance

The minimum cabinet size for accommodating an EX8208

 

switch is 23.62 in. (60 cm) wide and 30.0 in. (76.2 cm) deep.

 

Large cabinets improve airflow and reduce the chance of

 

overheating. To accommodate a single EX8208 switch in

 

a four-post rack, the cabinet must be at least 14 U high (or

 

15 U if you install the power cord tray, which is optional for

 

the four-post rack). To accommodate a single EX8208

 

switch in a two-post rack, the cabinet must be at least 15

 

U high.

 

A U is the standard rack unit defined in Cabinets, Racks,

 

Panels, and Associated Equipment (document number

 

EIA-310–D) published by the Electronics Industry

 

Association (http://www.eia.org).

 

With adequate cooling air and airflow clearance, you can

 

stack three EX8208 switches in a cabinet with a four-post

 

rack that has at least 42 U of usable vertical space. (45 U

 

are required if you install the optional power cord tray.) You

 

can stack three EX8208 switches in a cabinet with a

 

two-post rack that has at least 45 U of usable vertical space

 

(for two-post rack installations, installing the power cord

 

tray is mandatory). In all cases, the rack must meet the

 

strength requirements to support the weight.

 

The minimum total clearance inside the cabinet is 29.2 in.

 

(74.17 cm) between the inside of the front door and the

 

inside of the rear door.

100

Copyright © 2010, Juniper Networks, Inc.

Page 126
Image 126
Juniper Networks manual Cabinet Requirements and Specifications for an EX8208 Switch