Chapter 10: Connecting the Switch

Figure 69: Connecting the Power Supply Cables to an EX8200 Switch

8.Install the plastic cable cover over each set of power cables, using the number 2 Phillips (+) screwdriver to tighten the screw (see Figure 70 on page 179).

Figure 70: Installing the Plastic Cable Cover on a DC Power Supply in an EX8200 Switch

9.Ensure that the power supply is fully inserted and latched securely in the chassis. See “Installing a DC Power Supply in an EX8200 Switch” on page 152.

10.Repeat Steps 2 through 9 for the remaining power supplies.

Related Topics Powering On an EX8200 Switch on page 180

Copyright © 2010, Juniper Networks, Inc.

179

Page 205
Image 205
Juniper Networks EX8208 manual Connecting the Power Supply Cables to an EX8200 Switch