
Complete Hardware Guide for EX8208 Ethernet Switches
•Enter the hostname. This is optional.
•Enter a password and reenter the password.
•Specify the time zone.
•Synchronize the date and time settings of the switch with the management PC or set them manually by selecting the appropriate option button. This is optional.
Click Next.
7.Use the Management Options page to select the management scenario:
NOTE: On EX4500 and EX8200 switches, only the
•
Select this option to configure all data interfaces as members of the default VLAN. Click Next. Specify the management IP address and the default gateway for the default VLAN.
•
Select this option to create a management VLAN. Click Next. Specify the VLAN name, VLAN ID, member interfaces, management IP address, and default gateway for the new VLAN.
•
Select this option to configure only the management interface. Click Next. Specify the IP address and default gateway for the management interface.
8.Click Next.
9.On the Manage Access page, you may select options to enable Telnet, SSH, and SNMP services. For SNMP, you can configure the read community, location, and contact.
10.Click Next. The Summary screen displays the configured settings.
11.Click Finish.
The configuration is committed as the active switch configuration. You can now log in with the CLI or the
If you use the
194 | Copyright © 2010, Juniper Networks, Inc. |