Juniper Networks EX8208 manual SFP+ Direct Attach Cable Specifications, Model Specification

Chapter 3: Component Specifications

Table 35: SFP+ Direct Attach Cable Specifications

Model	Specification
EX-SFP-10GE-DAC-1m	Rate	10 Gbps full-duplex serial transmission
	Connector type	SFP+ passive Twinax cable assembly
	Supply voltage	3.3 V
	Power consumption (per end)	0.57 W
	Storage temperature	-40°C to 85°C
	Cable type	Twinax
	Wire AWG	30 AWG
	Minimum cable bend radius	1 in.
	Cable characteristic impedance	100 ohms
	Crosstalk between pairs	2% maximum
	Time delay	1.31 nsec/ft
	Length	1 m (3.3 ft)
EX-SFP-10GE-DAC-3m	Rate	10 Gbps full-duplex serial transmission
	Connector type	SFP+ passive Twinax cable assembly
	Supply voltage	3.3 V
	Power consumption (per end)	0.57 W
	Storage temperature	-40°C to 85°C
	Cable type	Twinax
	Wire AWG	30 AWG
	Minimum cable bend radius	1 in.
	Cable characteristic impedance	100 ohms
	Crosstalk between pairs	2% maximum
	Time delay	1.31 nsec/ft
	Length	3 m (9.9 ft)

Copyright © 2010, Juniper Networks, Inc. 85