Canon D680, D661 Loading Paper in the Multi-purpose Tray, Press Additional Functions, then select

Page 21

Loading Paper in the Multi-purpose Tray

Use the multi-purpose tray when you want to print on special paper, such as envelopes, transparencies, labels or heavy paper. You can place up to 100 sheets of 20-lb bond (80 g/m2) paper stack (a stack approximately 3/16” or 10 mm high) in the multi-purpose tray to be automatically fed into the machine.

1

2

3

4

Open the multi-purpose tray.

Pull out the paper tray.

Load the paper stack facing up into the multi-purpose tray.

Adjust the slide guides to fit the size of the paper stack.

IMPORTANT

NOTE

•If the slide guides are not adjusted correctly for the paper size, the quality of your print images may be adversely affected.

•When making copies on LTR-size paper after having continuously copied on paper smaller than LTR-size paper, the copies may be dirty. To prevent copies from being dirty, wait about one minute before making copies.

•Insert the paper stack into the machine as far as it will go.

•If the paper is curled, uncurl it before placing it in the multi-purpose tray. Failure to do so will cause paper creases and a paper jam.

•16 to 32-lb bond (56 to 128 g/m2) paper is acceptable.

•Make sure that the paper stack does not exceed the paper limit guide.

•Some types of paper may not feed properly into the multi-purpose tray. For high- quality copies, be sure to use the paper and

transparencies recommended by Canon. (→ p. 2-1)

•Load transparencies one by one.

•When making copies of a small size document or thick paper, etc., the copy speed may be slightly slower than usual.

•To specify the paper size every time you load the paper into the multi-purpose tray, follow the procedure below:

Press Additional Functions, then select:

COMMON SETTINGS, MP TRAY PAPERSIZE, OFF,

SET ON LOADING.

Load the paper into the multi-purpose

tray, and choose the paper size using 4 (–)or e (+), then press Set.

For details, refer to “Selecting the Paper

Feeding Location (Cassette or Multi- purpose Tray).” (→ p. 4-3)

2-6

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Eference Guide Using Your Documentation CopyrightTrademarks Laser Safety Cdrh RegulationsFCC Notice Contents Type Conventions Used in This Guide Transparencies Power Cord Supplies & AccessoriesSet-Up Help & Product Registration USA Canon Information Center in CanadaPage Customer Support Important Safety InstructionsPower Supply Handling Front View Main Components of the MachineFront View of the ADF ImageCLASS D680 Operation PanelImageCLASS D660/D661 Standby DisplayEnergy Saver Mode Setting the Energy Saver Mode ManuallyRestoring from the Energy Saver Mode Paper Storage Print Media RequirementsUnacceptable Paper Acceptable PaperEnvelope Printable AreasLoading Paper in the Cassette Loading PaperOpen a package of paper, and remove Paper stack Gently insert the cassette as far as it will goIf copy paper is sticking out of the cassette Closing the cassetteAdjusting a Cassette to Hold a Different Paper Size Slightly, and align the length guide withLength mark for the paper to be loaded Cassette Press Additional Functions, then select Loading Paper in the Multi-purpose TraySet Loading Envelopes in the Multi-purpose TrayPage Platen Glass Documents You Can CopyProblem Documents Settings of the Additional FunctionsScanned Area of a Document Setting Up Documents Placing a Document on the Platen GlassPositioning Documents Adjust the slide guides to the width of the document Loading Documents in the ADFMake sure there is no document on Paper Path of the Automatic Document Feeder Page Copying Documents Press Copy to set to Copy Mode Press Start to begin copyingWhile scanning documents in the ADF Canceling the Copy JobAfter scanning documents PressSpecifying the Paper Size Making Multiple CopiesUse the numeric keys to enter the number of copies you want Press Paper Select to select the paperSpecifying the Paper Type Inch MillimeterPress Additional Functions , then Enlarging/Reducing using preset copy ratios Setting Enlarging/ReducingAdjusting the Copy Exposure Setting the Image QualityAdjusting Automatically Adjusting ManuallySpecial Features When Loading Documents in the ADFCollate Copy Place the last page of a document on the platen glass When Placing a Document on the Platen GlassPress Start Place the next page of the documentPress 2 on Press Start On 1 CopyUse the numeric keys to set the copy Quantity. → pPress 2 on Place the next page of the document on the platen glassPress Set to finish the 2 on 1 copy function Reserve Copy Reserving the Next Copy JobConfirming the Copy Job You Reserved Press Stop/Reset while the machine is printing out Deleting the Copy Job You ReservedUse 4 -or e + to display the job to be deleted Two-Sided Copy Load the next page of the document in the ADFPress Paper Select to select the multi- purpose tray Place the next page of the document on Platen glass ABCPeriodic Cleaning Cleaning the ExteriorCleaning the Scanning Area Cleaning the Rollers Inside the Main Unit Cleaning the Read Area of the Platen GlassPress Set Use 4 -or e + to select Roller Cleaning Use 4 -or e + to selectPress Set Use 4 -or e + to select Clean Cleaning the ADF RollerPress Stop/Reset to finish the cleaning Each time you press Set, the ADF rollerWhen to Replace the Cartridge Copy Yield Handling PrecautionsHandling and Storing the Cartridge Approximate copy yieldStorage Precautions Storing Partially Used CartridgesRecycling Used Cartridges Replacing the Cartridge Remove the new cartridge from itsProtective bag. Save the protective bag If toner is not evenly distributed inside Canon Cartridge Recycling Program Clean Earth CampaignMaximum weight = 70 pounds Option B Volume Box ReturnPackaging Option A-1 Single Box ReturnOption a UPS Pick-up ShippingOption B MBE Drop off OK-CANONOption a Single Box Return Option B Volume Box Return 8 or more cartridgesRepacking and Transporting Transporting the Machine by Car Carrying the Machine by the SidesClearing Jams Removing Jammed Paper from Inside the Main UnitRemove the cartridge from the machine Gently remove any jammed paper from inside the main unit Flip the transfer guide Open the right coverRemoving Jammed Paper from the Multi-purpose Tray Removing Jammed Paper from the ADFJammed paper from the ADF Gently remove the jammed paper fromMessage LCD MessagesCause ActionRemove DOC. on Glass Replace Cartridge Start Again Paper does not feed correctly Paper Feeding ProblemsRepeated paper jams occur Copying ProblemsCopies are dirty Print Quality ProblemsCopy images are missing when you make copies on envelopes General Problems Printing ProblemsIf You Cannot Solve the Problem Page Understanding the Additional Functions Accessing the Additional FunctionsPress 4 -or e + to select the menu you want to change Use 4 -or e + to select the sub menu you want to changeName Descriptions Menu DescriptionsCopy Settings Timer Settings Multiple Copies Power Requirements ResolutionPower Consumption Dimensions W ⋅ D ⋅ HPage Index Energy Saver setting Enlarge/Reduce Platen is Open User Data setting Memo Memo Canon Italia S.p.A Canon Deutschland GmbH
Related manuals
Manual 94 pages 43.09 Kb

D661, D680 specifications

Canon D680 and D661 are two standout models in Canon’s lineup of printers, designed to meet the needs of both home users and small office environments. These multifunctional devices combine high-quality printing, scanning, and copying capabilities, making them great all-in-one solutions.

One of the key features of the Canon D680 and D661 is their impressive printing speed. Both models are engineered to deliver fast printouts, allowing users to produce documents efficiently. Whether printing in black and white or color, these printers maintain a high level of performance, making them suitable for users who frequently require printed materials.

The print quality of these models is another significant advantage. Utilizing Canon's advanced inkjet technology, the D680 and D661 deliver sharp text and vibrant images. Their high-resolution output ensures that even detailed graphics and photos are rendered beautifully, making these printers ideal for creative projects, presentations, and professional documents.

Connectivity is also a strong suit for both the D680 and D661. With built-in Wi-Fi, users can print from multiple devices, including smartphones and tablets, without the need for cumbersome cables. This wireless convenience allows for seamless integration into home or office environments, enhancing productivity and ease of use.

Moreover, these models support various paper sizes and types, adding versatility to printing tasks. Users can choose to print on standard paper, glossy photo paper, or other specialty media, enabling them to tackle a range of projects, from everyday documents to high-quality photo prints.

Another noteworthy characteristic of the Canon D680 and D661 is their energy-efficient design. These printers comply with energy-saving standards, which not only helps reduce electricity costs but also aligns with eco-friendly initiatives. Additionally, they feature automatic duplex printing, allowing users to print on both sides of the paper, which further conserves resources.

In terms of user-friendly features, both models boast an intuitive control panel and an LCD display for easy navigation. Furthermore, they support various mobile printing technologies, allowing users to print directly from cloud services, enhancing flexibility.

Overall, the Canon D680 and D661 deliver a compelling combination of speed, quality, connectivity, and user-friendly features, making them excellent choices for anyone in need of a reliable and versatile printing solution. Whether for personal use, business documents, or creative projects, these printers provide exceptional performance to meet a variety of needs.
Top Page Image Contents