Canon MF5650 manual Output Tray Full

Page 65

DOCUMENT TOO LONG

Cause

 

The document is longer than 1 m, or is not feeding correctly.

 

 

Remedy

 

Reduce the length of the document to within 1 m, and then copy it.

 

INSTALL CARTRIDGE

 

 

 

 

Cause

 

The cartridge is not installed or not installed correctly.

 

 

Remedy

 

Install the cartridge correctly. (See "Replacing the Cartridge," on p. 8-6.)

 

 

MEMORY FULL

 

 

 

 

 

Cause 1

 

The machine's memory is full because the collate copy or 2 on 1 copy function was set when a large

 

 

document is loaded.

 

 

Remedy

 

Divide the document and copy each part separately.

 

 

If <MEMORY FULL> appears while scanning documents using the ADF, the document being

 

 

scanned stops in the ADF. In this case, follow the procedure in "Removing Jammed Paper from the

 

 

ADF," on p. 9-6 to clear the paper jam in the ADF.

 

 

Cause 2

 

You tried to reserve more than 11 copy jobs.

 

 

Remedy

 

The machine can store up to 10 copy jobs in memory. Wait until the current copy job completes, or

 

 

use [Status Monitor] to delete the reserved copy jobs in memory.

 

OUTPUT TRAY FULL

 

 

 

 

Cause

 

The output tray is full of paper.

 

 

Remedy

 

Pick up the printed pages in the output tray.

 

PRINTER DATA ERROR

 

 

 

 

Cause

 

When you canceled a job being processed, the next job on the spooled job list may have been also

 

 

deleted.

 

 

Remedy

 

Check if the job that immediately follows the job being processed has been deleted on the spooled

 

 

job list. Disconnect the USB cable and connect it again, or unplug the machine and plug it in again to

 

 

clear the error message.

 

 

REC. PAPER JAM

 

 

 

 

 

Cause

 

There is a paper jam.

 

 

Remedy

 

Clear the paper jam (See "Clearing Jams," on p. 9-1) and reload paper in the cassette or

 

 

multi-purpose feeder. Then reset the machine by opening the front cover and then closing it.

9

Troubleshooting

9-9

Page 64 Page 66
Image 65
Page 64 Page 66
Contents User’s Guide Manuals for the Machine Copyright Trademarks Contents Chapter Printing from Your Computer Chapter MaintenanceChapter Copying Chapter ScanningChapter Appendix Chapter TroubleshootingMachine Settings Symbols Used in This Manual How to Use This ManualKeys Used in This Manual Messages Displayed in the LCDIllustrations Used in This Manual Main Components of the Machine IntroductionCustomer Support Output tray Telephone line jack Operation panel CassetteFront cover External device jack Multi-purpose feederFace up cover Extension cover USB port Power socketMF5650 Operation PanelScan Mode Copy ModeStandby Display MF5630Setting the Energy Saver Mode Manually Energy Saver ModeRestoring from the Energy Saver Mode Manually Press Energy SaverPrint Media Requirements Paper HandlingPaper Storage Unacceptable PaperEnvelope Printing AreasPaper Pull out the cassette completely Loading PaperLoading Paper in the Cassette Paper Handling Specify the size and the type of the paper you load Insert the cassette into the machineSlide the paper guides to the mark of the desired paper size Loading Paper in the Multi-Purpose FeederLoading an Envelope in the Multi-Purpose Feeder Specifying the Paper Size Press Stop/Reset to return to the standby displayOrientation of the Document and the Paper Loading Specifying the Paper TypePlaten glass Document Paper Cassette Multi Pupose Copy FeederPaper Type Paper Output Area Number of Output Sheets Selecting the Paper Output AreaPaper Type and Paper Output Area Face Up Paper Output Area Face Down Paper Output AreaDocument Requirements Problem DocumentsDocument Handling Placing a Document on the Platen Glass Setting Up DocumentsScanned Area of a Document Loading Documents in the ADF Document Handling Machine scans documents from the first Scanning unit Paper Path of the ADFBefore Printing Printing from Your ComputerPrinting Documents Load paper in the cassette or the multi-purpose feederMore Information Canceling PrintingSelect the command to print Copying Adjust any necessary settings for your documentDocuments You Can Copy Making CopiesEnlarging/Reducing Using Custom Copy Ratios Setting Enlarging/ReducingEnlarging/Reducing Using Preset Copy Ratios Adjusting the Exposure Density Adjusting the Image Quality ResolutionAdjusting Automatically Adjusting ManuallyCollate Copy Special FeaturesWhen Loading Documents in the ADF Place the first page of a document on the platen glass When Placing a Document on the Platen GlassPlace the next page of the document on the platen glass Press OKDocuments On 1 CopyPressNEXTPGEENDSCStartA. NNINGx Startok Reserve Copy Scanning Methods ScanningBefore Scanning Press Scan → Start on the machine Confirming and Deleting a Fax Job System MonitorChecking the Status of the Jobs Stored in the Machine Confirming and Deleting a Copy Job Confirming Transmission ResultsConfirming and Deleting a Report Job Confirming and Deleting a Print JobPeriodic Cleaning MaintenanceCleaning the Exterior Cleaning the Scanning AreaBlack lines Cleaning the ADF AreaPaper feeding direction When to Replace the CartridgePrint Yield Handling PrecautionsHandling and Storing the Cartridge Approximate Print YieldStorage Precautions Storing Partially Used Cartridges Replacing the CartridgeRecycling Used Cartridges Open the front coverRemove the new cartridge from its protective bag Close the front cover Carrying the Machine by the Sides Repacking and Transporting Your MachineTransporting the Machine by Car Clearing Jams TroubleshootingRemoving Jammed Paper from Inside the Machine Open the front cover Remove the cartridgeTroubleshooting Troubleshooting Troubleshooting Troubleshooting Insert the cassette to the machine Removing Jammed Paper from the ADFTroubleshooting Check Document LCD MessagesOutput Tray Full Supply REC. Paper Paper Feeding ProblemsTroubleshooting Troubleshooting Copying Problems Print Quality Problems Troubleshooting Scanning Problems Printing ProblemsGeneral Problems If You Cannot Solve the Problem Menu Descriptions Machine SettingsAccessing the Machine Settings Common Settings OFF Copy Settings Printer Settings Appendix SpecificationsPower Consumption Multiple Copies Power RequirementsDimensions W x D x H Installation Space W x DIndex Symbols11-4 11-5

MF5650 specifications

The Canon MF5650 is a monochrome laser multifunction printer that stands out for its exceptional printing capabilities and versatile functionality. This machine is designed to meet the demands of small to medium-sized offices, offering a compact yet powerful solution for handling various tasks such as printing, scanning, copying, and faxing.

One of the main features of the Canon MF5650 is its fast printing speed. It can produce up to 26 pages per minute (ppm), allowing users to print large documents quickly and efficiently. The printer has a first print out time of approximately 6 seconds, ensuring minimal wait time for users. With a maximum print resolution of 1200 x 600 dpi, the MF5650 delivers sharp text and crisp graphics, making it suitable for professional documents.

The device also includes a 50-sheet automatic document feeder (ADF), which streamlines the scanning and copying process by allowing multiple pages to be handled at once. This feature complements its flatbed scanner, which provides the ability to scan and copy larger documents with ease. Moreover, the MF5650 supports various media sizes up to legal size, making it versatile enough for a range of office needs.

The Canon MF5650 employs advanced technology, including Canon’s proprietary UFR II (Ultra Fast Rendering) print technology, which enhances printing speed and efficiency. This system optimizes data transmission, ensuring that the processor can focus on printing, thereby minimizing processing time. Additionally, the printer's compatibility with various operating systems, including Windows and Mac, ensures that it can integrate seamlessly into existing office environments.

In terms of connectivity, the MF5650 offers USB 2.0 support, enabling easy connection to a personal computer. While it lacks network capabilities such as Wi-Fi, its straightforward setup makes it accessible for individual users or small teams looking for direct connectivity.

Another noteworthy characteristic of the MF5650 is its energy efficiency. The printer is equipped with Canon’s Energy Saver mode, which reduces power consumption during periods of inactivity. This not only contributes to lower energy bills but also aligns with a more environmentally friendly approach.

Overall, the Canon MF5650 is a robust multifunction printer that excels in speed, efficiency, and versatility. Its advanced features and compact design make it an ideal choice for businesses seeking a reliable solution to meet their printing, scanning, copying, and faxing needs.
Top Page Image Contents