Belkin F5D7001 user manual Using the Belkin Wireless LAN Utility

Page 33

Using the Belkin Wireless LAN Utility

Connecting your Computer to a Wireless Router or Access Point that uses WPA (with Radius Server)

1. Double-click the “Signal Indicator” icon to bring up the “Wireless Network Properties” screen. The “Advanced” button will allow you to view and configure more options of your Card.

2. Under the “Wireless Networks” tab, select a network name from the “Available networks” list and click “Configure”. The screen to the left

will appear.

3. Under “Network Authentication” select “WPA”.

4. Under the “Authentication” tab, select the settings that are indicated by your network administrator.

5. Click “OK”, to save the settings.

1

2

3

4

5

6

section

31

Image 33

Contents High-Speed Mode Wireless G Desktop Network Card Table of Contents Introduction Introduction Avoid Obstacles and Interference Cordless Phone PlacementSecure connections, VPNs, and AOL Choose the quietest channel for your wireless networkIntroduction Overview Product FeaturesDifficult-to-wire environments Connection rates of up to 54Mbps or 125Mbps* using HSMCompatibility with 802.11b products Frequently changing environmentsDetachable Antenna Product Specifications Card ConnectorActivity LED green Link LED orangeSystem Requirements Package ContentsInstall the Software Installing and Setting Up the CardInsert the Card into the Computer Installing and Setting Up the Card Let Windows Finish the Installation Installing and Setting Up the Card Installation is now complete Setting Wireless Network Preferences Click on the Wireless Networks tab Enable RadioAvailable Networks Add, Remove Preferred NetworksSystem Tray Icon PropertiesAny Available Network Access Point Preferred Access Point Infrastructure Networks OnlyComputer-to-Computer Ad-Hoc Networks Only Securing your Wi-FiNetwork WEP Wired Equivalent Privacy Bit WEPEncryption Keys C3030FAF0F4BB2C3D44BC3D4E7 = 128-bit WEP key WPA Wi-Fi Protected AccessUsing a Hexadecimal Key Changing the Wireless Security Settings Bit WEP Encryption WEP SetupC3030FAF0F4BB2C3D44BC3D4E7 = 128-bit WEP key WPA-PSK no server WPA with server Settings Using the Belkin Wireless LAN Utility Type your WEP key in the Network key box Using the Belkin Wireless LAN Utility Using the Belkin Wireless LAN Utility Monitoring the Status of your Network Connection Client IP Address SignalNetwork Connection Type Radio StateClick on the Statistics tab Monitoring Data TransferFinding Available Networks in your Area Click on the Diagnostics tab Performing Diagnostic Tests on your ConnectionControl Registers Sprom Format VersionInterrupt Test Loopback TestLED Test Can’t connect to the Internet wirelessly TroubleshootingName of your wireless network appears in Available Networks Power LED does not come on Card is not working Installation CD-ROM does not start Setup UtilityLink LED is solid but cannot connect to the Internet Data transfer is sometimes slow Signal strength is poorTroubleshooting Wireless PCI Card is not Detected by Operating System What’s the difference between 802.11b, 802.11g and 802.11a? Wireless ComparisonEurope 00 800 223 55 US +1 Technical SupportFederal Communications Commission Notice FCC StatementInformation Belkin Corporation Limited Lifetime Product Warranty Belkin GmbH

Related manuals

Manual 52 pages 22.48 Kb