Belkin F5D7001 user manual Avoid Obstacles and Interference, Cordless Phone Placement

Page 5

Introduction

2.Avoid Obstacles and Interference

Avoid placing your Wireless Router (or Access Point) near devices that may emit radio “noise”, such as microwave ovens. Other objects that can inhibit Wireless communication can include:

Refrigerators

Washers and/or dryers

Metal cabinets

Large aquariums

Metallic-based UV tinted windows

If your wireless signal seems weak in some spots, make sure that objects such as these are not blocking the signal’s path between your computers and Wireless Router (or Access Point)

3.Cordless Phone Placement

If the performance of your wireless network is impaired after attending to the above issues, and you have a cordless phone:

Try moving cordless phones away from your Wireless Router or Access Point and your wireless-enabled computers

Unplug and remove the battery from any cordless phone that operate on the 2.4GHz band (check manufacturers information). If this fixes the problem, your phone may be interfering.

If your phone supports channel selection, change the channel on the phone to the furthest channel from your wireless network, as possible. For example, change the phone to channel 1 and move your Wireless Router to channel 11. See your phone’s user manual for detailed instructions.

If necessary, consider switching to a 900MHz or 5GHz cordless phone.

1

2

3

4

5

6

section

3

Image 5
Contents High-Speed Mode Wireless G Desktop Network Card Table of Contents Introduction Introduction Avoid Obstacles and Interference Cordless Phone PlacementSecure connections, VPNs, and AOL Choose the quietest channel for your wireless networkIntroduction Overview Product FeaturesDifficult-to-wire environments Connection rates of up to 54Mbps or 125Mbps* using HSMCompatibility with 802.11b products Frequently changing environmentsDetachable Antenna Product Specifications Card ConnectorActivity LED green Link LED orangeSystem Requirements Package ContentsInstall the Software Installing and Setting Up the CardInsert the Card into the Computer Installing and Setting Up the Card Let Windows Finish the Installation Installing and Setting Up the Card Installation is now complete Available Networks Setting Wireless Network PreferencesClick on the Wireless Networks tab Enable Radio Add, Remove Preferred NetworksSystem Tray Icon PropertiesComputer-to-Computer Ad-Hoc Networks Only Any Available Network Access Point PreferredAccess Point Infrastructure Networks Only Securing your Wi-FiNetwork Encryption Keys WEP Wired Equivalent PrivacyBit WEP C3030FAF0F4BB2C3D44BC3D4E7 = 128-bit WEP key WPA Wi-Fi Protected AccessUsing a Hexadecimal Key Changing the Wireless Security Settings Bit WEP Encryption WEP SetupC3030FAF0F4BB2C3D44BC3D4E7 = 128-bit WEP key WPA-PSK no server WPA with server Settings Using the Belkin Wireless LAN Utility Type your WEP key in the Network key box Using the Belkin Wireless LAN Utility Using the Belkin Wireless LAN Utility Monitoring the Status of your Network Connection Client IP Address SignalNetwork Connection Type Radio StateClick on the Statistics tab Monitoring Data TransferFinding Available Networks in your Area Click on the Diagnostics tab Performing Diagnostic Tests on your ConnectionControl Registers Sprom Format VersionLED Test Interrupt TestLoopback Test Can’t connect to the Internet wirelessly TroubleshootingName of your wireless network appears in Available Networks Power LED does not come on Card is not working Installation CD-ROM does not start Setup UtilityLink LED is solid but cannot connect to the Internet Data transfer is sometimes slow Signal strength is poorTroubleshooting Wireless PCI Card is not Detected by Operating System What’s the difference between 802.11b, 802.11g and 802.11a? Wireless ComparisonEurope 00 800 223 55 US +1 Technical SupportFederal Communications Commission Notice FCC StatementInformation Belkin Corporation Limited Lifetime Product Warranty Belkin GmbH
Related manuals
Manual 52 pages 22.48 Kb