Using the KVM Switch, Command Hotkeys | Belkin F1DD104LEA guide

Using the KVM Switch

To modify the hot-key preceding sequence from the default Scroll Lock, you can either hit the hot-key sequence: scrlk – scrlk – H – (y), y = y = SCROLL LOCK, CAPS, ESC, F12 or NUM LOCK (as detailed in the QIG).

You can use another method: Press and hold the last button to enter the hot-key setting mode.

Step 1. Press and hold the last button (i.e., the second button on the 2-port model and the fourth button on the 4-port model) till you hear two beeps. Then release the button.

Step 2. Within two seconds, you should hit any of the selectable hot-key triggers (y), y = y = SCROLL LOCK, CAPS, ESC, F12 or NUM LOCK, to be your hot-key trigger.

For example, if you hit CAPS after hearing the two beeps, then the hot key will be: CAPS – CAPS – command key.

For detailed hot-key sequences and their corresponding functional commands, please refer to the Quick-Reference Sheet.

Hotkey Reference Table

2/4-port SOHO KVM Switch w/ Audio&Mic -- Operation Commands for Hotkeys / Front-Panel Buttons

Hotkey sequence = [ScrLk]* + [ScrLk] * + Command key(s) * User-definable Preceding sequence = SCROLL LOCK, CAPS, F12 or NUM

LOCK, LEFT_CTRL, RIGHT_CTRL

Command	Hotkeys1	Front-panel	Description
		Buttons

Select Computer Channel 2 (Joint-select PC port/audio&mic, if binding is enabled)

Select Audio&Mic Channel 2

(Joint-selectPC port & audio/mic , if binding is enabled)

Bind Computer & Audio/Mic

Switching 2

[Default]

Unbind PC & Audio/Mic

Switching 2

Next lower PC channel 2 (Joint-select PC /audio&mic,if binding is enabled)

Next higher PC channel 2 (Joint-select PC /audio&mic, if binding is enabled)

Previous PC channel

Define Hotkey Preceding Sequence

ScrLk + ScrLk + (x)

(x is a top-row number key)

x = 1~2 / x = 1~4 for PC channel no

ScrLk + ScrLk + (Fy)

Fy = F5~F6/Fx=F5~F8 (Fy is a function

key)

y = 1~2 / y = 1~4 for audio/mic channel

ScrLk + ScrLk + Q

ScrLk + ScrLk + W

ScrLk + ScrLk + (arrow down)

ScrLk + ScrLk + (arrow up)

ScrLk + ScrLk + (Backspace)

ScrLk + ScrLk + H + (y)

y = SCROLL LOCK, CAPS,

F12, NUM LOCK, LEFT_CTRL, or

RIGHT_CTRL

Press the computer icon on the left of a button to select the active computer channel

Press and hold down last button (Button 2 / Butotn4) till three beeps, release the button, then press (y) key

Select the active computer channel

(Hotkey: Joint-select PC port/audio&mic , if binding is enabled)

Select the active Audio&Mic channel (Hotkey: Joint-select PC & audio&mic channel, if binding is enabled)

Enable the binding of PC port and audio&mic switching. (Hotkey: Once this feature is enabled, any computer and/or audio&mic switching by hotkeys is bound together) (factory default)

Disable the binding of PC port and audio&mic switching

Select the next lower connected PC channel (Hotkey: Joint-select PC/audio&mic, if binding is enabled)

Select the next higher connected PC channel (Hotkey: Joint-select PC/audio&mic , if binding is enabled)

Toggle between the previous channel and current channel

Select the hotkey preceding sequence among 5 alternative keys