Belkin F1DS102U, F1DS104U user manual Connecting the PCs

Page 8

STEP-BY-STEP INSTALLATION GUIDE

7.Using the audio cable attached to your speakers, connect the male 3.5mm plug to “audio” on the Console of your KVM Switch. (This step is not required to use the KVM Switch.)

8.Using the mic cable attached to your microphone, connect the male 3.5mm plug to “mic” on the Console of your KVM Switch. (This step is not required to use the KVM Switch.)

STEP-BY-STEP INSTALLATION GUIDE

Connecting the PCs

1.Power up the computers. Once the operating system has loaded, connect the KVM Switch and the computer using the USB cable. The operating system will automatically install the KVM Switch.

2.Shut down your computer. Take the VGA cable and connect the male end of the cable to the VGA port on the back of the computer. Connect the female end of the VGA cable to the back of the KVM Switch for CPU1. Do this for all computers.

12

13

Image 8
Contents OmniView Table of Contents IntroductionOverview Power Supply Front of the KVM SwitchCables Platforms Cable Distance Requirements Where to Place the KVM Switch Back of the KVM Switch Installing the KVM Switch Base DimensionsWeight Warranty 5 yearsInstalling the HID USB Driver Connecting the ConsoleConnecting the PCs Using Your Soho Series USB KVM Switch Powering Up the SystemsSelecting a Computer Using Direct-Access Port Selectors Selecting a Computer Using Keyboard Hot Key CommandsBelkin KVM Switches and Accessories AutoScan ModeConnecting USB Devices to the Built-In 2-Port Hub OmniView KVM Switches OmniView E SeriesOmniView PRO2 Series with On-Screen Display OmniView MATRIX2 Series with Dual-Console ControlOmniView KVM Cables OmniView E Series KVM CablesOmniView PRO Series Plus All-In-One KVM Cables OmniView Matrix Series All-In-One KVM CablesOmniView Gold Series All-In-One KVM Cables OmniView Daisy-Chain CablesFAQs OmniView KVM Accessories and AdaptersFAQs TroubleshootingKeyboard CE Declaration of Conformity Belkin Corporation Limited Five-Year Product WarrantyFCC Statement