Belkin F1DN104DEA Mounting the Switch optional, Bracket Installation F1DN102Dea and F1DN104Dea

Page 11

Installation

Step 1 Mounting the Switch (optional)

Bracket Installation (F1DN102Dea and F1DN104Dea)

The 2- and 4-Port Switches can be installed into a 19-inch rack using an optional Rack-Mount Kit, sold separately (Belkin part number F1D005).

1.1Attach the Rack-Mount Bracket to the Switch using the Phillips screws provided. (Refer to diagram below.)

1.2Mount the Switch to the rack rails. (Refer to diagram below.)

Your Switch is now mounted securely to the rack and you are ready to connect your console.

1

2

3

4

5

6

7

section

9

Image 11

Contents OmniView Secure DVI Dual-Link KVM Switch Table of Contents Introduction Package ContentsOverview Security FeaturesOther Features Belkin DVI/USB KVM Cable Kits with Audio & Mic Equipment RequirementsCables System Requirements Side View Unit Display DiagramsFront View Back ViewSpecifications Where to place the Switch InstallationPre-Configuration Bracket Installation F1DN102Dea and F1DN104Dea Mounting the Switch optionalConnecting the Console to the Switch required InstallationConnecting Computers to the Switch required Powering Up the Systems required Selecting a Computer Using Port Selectors Using your SwitchHow far can the Switch be from my computer? Frequently Asked QuestionsAm getting a black screen on my monitor GeneralVideo Keyboard TroubleshootingMouse Information How state law relates to the warranty How to get serviceInformation Belkin Tech Support Express Business Park, Shipton Way