Motorola E816 manual Installing the Battery, Charging the Battery, To charge the battery

Installing the Battery

Your phone is designed to use only Motorola Original batteries and accessories.

Note: The battery door unsnaps more easily if you push it to the left as you remove it.

1. Step one: Release latch
and remove back door.	Release
	Latch
	032409o

2. Step two: Follow arrows to insert battery.

3. Step three: Replace the back door.

032409o

Note: The battery door unsnaps more easily if you push it to the left as you remove it.

PAGE 6 INSTALLING THE BATTERY GETTING STARTED

Charging the Battery

New batteries are shipped partially charged. Before you can use your phone, install and charge the battery as described below. Some batteries perform best after several full charge/discharge cycles.

To charge the battery:

1.Plug the charger into the bottom of your phone with the release tab facing up.

2.Plug the other end of

the charger into the appropriate electrical outlet.

3.When your phone’s interior display shows Charge Complete, remove the charger.

Tip: You can safely leave the charger connected to your phone after charging is complete. This will not damage the battery.

Note: When you charge the battery, the battery level indicator in the upper right corner of the display shows how much of the charging process is complete. At least 1 segment of the battery level indicator must be visible to ensure full phone functionality while charging.