Belkin F1DK102U user manual Troubleshooting, Video, Keyboard

Page 13

TROUBLESHOOTING

Video

I am getting ghosting, shadowing, or fuzzy images on my monitor.

Check that all video cables are inserted properly.

Check that the monitor you are using supports the resolution and refresh-rate setting on your computer.

Check that the graphics card you are using supports the resolution and refresh-rate setting on your computer.

Connect the monitor directly into the computer you are having trouble with to see if the problem still appears.

I am getting a black screen on my monitor.

Check that all video cables are inserted properly.

Connect your monitor directly to the computer to verify that your monitor is functioning properly.

Take your computer off standby mode.

Keyboard

Computer does not detect your keyboard and you get a keyboard error reported at boot up.

Check that the keyboard cable between the Switch and the computer is connected properly. Tighten any loose connections.

Try swapping your keyboard with a different one.

Enable USB support on your BIOS.

11

Image 13
Contents Port KVM Switch with Built-In Cabling Table of Contents Introduction Package ContentsOverview FeaturesOperating Systems Your Switch is for use on CPUs using PlatformsKeyboards MiceUnit Display Diagram 2-Port KVM Switch with Built-In Cabling LED Indicators Enclosure Plastic SpecificationsWeight 1.2 lbs Warranty 3 yearsPre-Configuration InstallationWhere to Place the Switch Cable Distance RequirementsConnecting Computers to the Switch Step-by-Step Installation GuideInstallation FAQs FAQs Video TroubleshootingKeyboard Mouse General For Electromagnetic Compatibility InformationBelkin Corporation Limited Three-Year Product Warranty P74463