Belkin F1U109 user manual Skip Directly to

5

9.Add your printers. Do this by clicking on START, SETTINGS, PRINTERS. Then, double-click on the Add New Printer icon and follow the instructions.

IF YOUR PRINTER IS NOT LISTED - YOU HAVE TO ADD YOUR PRINTERS USING THE SOFTWARE THAT CAME WITH YOUR PRINTERS. IF THIS IS THE CASE, RUN YOUR PRINTER SETUP PROGRAM ACCORDING TO YOUR PRINTER MANUFACTURER’S INSTRUCTIONS, AND SKIP DIRECTLY TO PAGE 6.

IF ALL YOUR PRINTERS ARE ALREADY INSTALLED – YOU DO NOT HAVE TO ADD PRINTERS ANYMORE. SKIP DIRECTLY TO PAGE 6.

When you are asked to choose a port, select AUTOLPTx, where x corresponds to the port letter you would like to use.

For instance, your DeskJet printer is connected to Port A of the AutoSwitch. Select AUTOLPTA in the Add New Printer setup.

Do the same for the printer connected to Port B on the AutoSwitch. But this time, select

AUTOLPTB.

10.Turn off bi-directional communication on your printer driver. To do this, click on START, SETTINGS, PRINTERS, right-click on your printer, choose Properties. Click on the DETAILS tab, then on the SPOOL SETTINGS button. The following window will pop up:

Make sure “Disable bi-directional support for this printer” is selected. Ignore if grayed out.

10.SKIP DIRECTLY TO PAGE 7.