Belkin F8E838 manual Fixed Device Selection Keys

1

___

2

___

3

___

4

___

5

Using the MediaPilot Keyboard

Operation Keys (cont.)

Key Name	Default Function
P11	Programmable key
P12	Programmable key
1	Numeric 1
2	Numeric 2
3	Numeric 3
4	Numeric 4
5	Numeric 5
6	Numeric 6
7	Numeric 7
8	Numeric 8
9	Numeric 9
0	Numeric 0
Enter	Select current menu option
Up Arrow	Navigate up in menu
Down Arrow	Navigate down in menu
Left Arrow	Navigate left in menu
Right Arrow	Navigate right in menu
Channel Up	DVD/CD = Next track
	Other = Channel up
Channel Down	DVD/CD = Previous track
	Other = Channel down
Power	Turns power to a device on or off

Using the MediaPilot Keyboard

Device Selection Keys

There are two types of device selection keys—fixed and variable. The function of a fixed device selection key

is associated with a particular device type. A variable device selection key can be programmed to use a variety of different devices.

Fixed Device Selection Keys
Tuner - Selects an AV receiver	TV - Selects the TV
CD - Selects a CD player	Tape - Selects a VCR
DVD - Selects DVD player

The brand of the device to be controlled by the IR remote must be identified by using the MediaPilot software. Use the following procedure.

1.Launch the MediaPilot Control Center and select the “AV Key Programmer” tab.

2.Press the “P” (Program) key in combination with one of the fixed device-type keys (Tuner, DVD, TV, CD, Tape).

3.Type in the four-digit device code that corresponds to the device to be controlled. The device codes may be found on the “Device Chart” included in Appendix 1 of this User Manual.

4.Press the “P” (Program) key again.

Note: If the sequence above is not completed within 60 seconds, no changes will be saved.

1

___

2

___

3

___

4

___

5

14 15