Belkin P73890EA-A manual Installation

P73890-A_F5U222ea_man.qxd 9/30/02 3:48 PM Page 12

Installation (continued)

7.After the Card is inserted, Windows will install drivers for the “Universal Serial Bus Controller”.

8.Windows will now detect “Belkin USB 2.0 Hi-Speed Host Controller” and the “New Hardware Wizard” will start. Select “Install the software automatically (Recommended)”. Click “Next”.

9.Drivers for the “Belkin USB 2.0 Hi-Speed Host Controller” will now be located. Windows will display the following message: “The software you are installing has not passed Windows logo testing”. Ignore this message and select “Continue Anyway”.

10.Installation of the “Belkin USB 2.0 Hi-Speed Host Controller” will now be completed. Click “Finish”.

11.Windows will now detect the “USB 2.0 Root Hub Device”. Click “Next”.

12.Drivers for the “USB 2.0 Root Hub Device” will now be located. Windows will display the following message: “The software you are installing has not passed Windows logo testing”. Ignore this message and select “Continue Anyway”.

13.Installation of the “USB 2.0 Root Hub Device” is now complete. Click “Finish”.

The installation procedure is now complete.

Verifying Proper Installation (Windows XP)

After installation, check the Device Manager to confirm that the Card has been properly installed.

12