Belkin P73890EA-A manual Installation

P73890-A_F5U222ea_man.qxd 9/30/02 3:48 PM Page 5

Installation

En

Please refer to the section that corresponds to your version of Windows operating system.

Note: The included power supply is not needed for bus-powered USB devices such as keyboards and mice, or self-powered USB devices such as hard drives, printers, etc. Bus-powered devices that draw large amounts of power directly from the USB bus, such as webcams and certain scanners, will require the use of the power supply.

Installation Procedure for Windows 98 SE

This installation procedure will install two USB 1.1 OHCI controllers and one USB 2.0 EHCI host controller.

1.Insert the F5U222 installation CD into your CD-ROM drive. After a few moments the main menu will auto-start and display the available installation options.

2.Select “Install USB 2.0 Driver”.

3.The setup utility will now install a CardBus eject utility for your USB 2.0 CardBus adapter. Take note of the information provided regarding the eject utility, then click “Next” to continue.

4.After the driver is installed, select “Yes, I want to restart my computer now.” Click “Close”.

5.After Windows restarts, locate your laptop computer’s CardBus slot.

6.Insert the Card into the slot. Apply pressure as needed until it is fully seated.

7.After inserting the Card, Windows will detect the “NEC USB Open Host Controller” and the “Add New Hardware Wizard” dialog box will open. Click “Next”.

5