Belkin P73890EA-A manual Installation

P73890-A_F5U222ea_man.qxd 9/30/02 3:48 PM Page 13

Installation (continued)

En

1.Right-click on “My Computer”.

2.Select “Properties”.

3.Select the “Hardware” tab and click on the “Device Manager” button.

4.Click the plus sign (+) next to “Universal Serial Bus Controllers”.

The “Universal Serial Bus Controllers” list will now include two “NEC USB Open Host Controller” entries, one “Belkin USB 2.0 Hi-Speed Host Controller” entry, one “USB 2.0 Root Hub Device” entry, and two “USB Root Hub” entries.

Note: If your computer features built-in USB ports, or if you have other USB PCI controllers installed, you will see additional root hub entries.

Installing a Hi-Speed USB 2.0 Hub

Note: During installation of a Belkin Hi-Speed USB 2.0 Notebook Card driver, a Hi-Speed USB 2.0 Hub driver is also installed. When you attach a Hi-Speed USB 2.0 Hub to your Card for the first time, follow the procedure described below.

1.Turn on your computer.

2.Plug the power adapter (ships with the hub) into the hub and into a wall outlet.

3.Connect the flat end of the USB cable supplied with the hub to your computer and the square end of the cable to the upstream port of the hub.

13