Belkin P73890EA-A manual Installation

P73890-A_F5U222ea_man.qxd 9/30/02 3:48 PM Page 8

Installation (continued)

7.After the Card is inserted, Windows will detect “NEC USB Open Host Controller (E13+)” and “Belkin USB 2.0 Hi-Speed Host Controller”. The required driver support will be automatically installed. No user input is required.

8.After installation of the USB host controllers, Windows will detect “USB Root Hub” and automatically install the required driver support. This will repeat one more time.

9.Restart your computer to complete the installation procedure.

Verifying Proper Installation (Windows Me)

After installation, check the Windows Device Manager to confirm that the Card has been properly installed.

1.Right-click on “My Computer” and select “Properties”.

2.Select the “Device Manager” tab.

3.Click on the plus sign (+) next to “Universal Serial Bus Controllers”.

The “Universal Serial Bus Controllers” list will now include two “NEC USB Open Host Controller (E13+)” entries, one “Belkin USB 2.0 Hi-Speed Host Controller” entry, one “USB 2.0 Root Hub Device” entry, and two “USB Root Hub” entries.

Note: If your computer features built-in USB ports, or if you have other USB PCI controller cards installed, you will see additional USB Controller and root hub entries.

8