Self Help Guide
128 Bit WEP
•Double click on the Belkin Wireless Utility icon
•If you are prompted with a screen labelled Connect to Wireless Network click Advanced, otherwise continue to next step
•Click the Wireless Networks tab
•Remove anything listed in Preferred networks
•Click Refresh in Available Networks
•Highlight your available wireless network and click Configure
•Make sure Data encryption (WEP enabled) is ticked
•Untick The key is provided for me automatically
•Type in the 10 digit 128Bit encryption key the router generated
•Click OK
•Click OK again
DONE!
TSG | If you still require further assistance | Call: | 1300 554 780 |
Page 17 of 59 | contact Belkin Technical Support | Visit: | www.belkin.com/support |
|
|
|
|