Using Your Router, Setup steps | Belkin F9K1107 8820-00920 Rev. A00

USING YOUR ROUTER

Opening the Router Firmware’s Web Interface

In your browser, type “http://router” (you do not need to type in anything else such as “www”). Then press the Enter key. If you’re still having trouble running the manual setup option, type “192.168.2.1” in your browser (you do not need to type in anything else such as “http://” or “www”). Then press the Enter key.

Updating the Router’s Firmware via the Web Interface

The following steps show you how to update your Router’s firmware using its web interface. You do not need to be connected to the Internet as this interface is built into the Router itself.

Setup steps:

1.Locate and download the firmware file from the Belkin support site. (Type your part number into the search box in the top right corner and look for “Firmware” in the title.)

2.Save the file to a location on your computer where you can get to it easily, such as your desktop.

3.Connect the computer to your Router.

4.Open a web browser on the computer.

5.In the address bar of the web browser, type “http://192.168.2.1” and press “Enter” on your keyboard.

6.Click “Login” in the upper right-hand corner of the page. The Router does not ship with a password, so just click “Submit.”