Introduction

Table of Contents

sections

Revolutionary N+ Wireless Technology with MIMO (N MIMO)

Your Belkin N+ Wireless Router uses a new smart-antenna technology called Multiple Input Multiple Output (MIMO).. N MIMO complies with the IEEE draft 802..11n specification.. It increases speed, range, reliability, and spectral efficiency for wireless networking systems..

The element that makes Belkin’s N MIMO technology different from a conventional radio is the use of multiple antennas and two simultaneous data streams to deliver wireless transfers around your home or office.. A conventional radio uses one antenna to transmit a data stream.. Belkin’s N MIMO, on the other hand, uses two antennas.. This design helps combat distortion and interference.. Belkin’s N MIMO is multidimensional.. It builds on one-dimensional smart-antenna technology by simultaneously transmitting two data streams through the same channel, which increases wireless capacity..

Another element that enhances Belkin’s N MIMO is the use of aggregation as specified in the draft 802..11n specification.. By shortening the space between packets and combining multiple smaller packets into one larger packet, Belkin’s N MIMO can transmit more data through available bandwidth..

Think of conventional radio transmission as a two-lane highway.. The speed limit governs the maximum allowable flow of traffic through that lane.. Compared with conventional radios, one-dimensional smart antenna systems help move traffic through that lane faster and more reliably—analogous to a four-lane road on which traffic consistently moves at a rate closer to the speed limit.. Belkin’s N MIMO helps traffic move at the speed limit and opens more lanes—to become the superhighway in this example.. The rate of traffic flow is multiplied by the number of lanes that are opened..

Placement of your N+ Wireless Router

Important Factors for Placement and Setup

Your wireless connection will be stronger the closer your computer is to your Router.. Typical indoor operating range for wireless devices is between 100 and 200 feet..

In the same way, your wireless connection and performance will degrade somewhat as the distance between your Router and connected devices increases.. This may or may not be noticeable to you.. As you move further from your Router, connection speed may decrease.. Factors that can weaken signals simply by getting in the way of your network’s radio waves are metal appliances or obstructions, and walls..

If you have concerns about your network’s performance that might be related to range or obstruction factors, try moving the computer to a position between five and 10 feet from the Router in order to see if distance is the problem.. If difficulties persist even at close range, please contact Belkin Technical Support..

Note: While some of the items listed below can affect network performance, they will not prohibit your wireless network from functioning; if you are concerned that your network is not operating at its maximum effectiveness, this checklist may help..

N+ Wireless Router