Troubleshooting
Table of Contents | sections | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
Troubleshooting
Setup Assistant CD does not automatically start.
If the
1.If the Setup Assistant Welcome screen does not appear within
2.Next,
3.The Setup Assistant should start within a few seconds.. If, instead, a window appears showing the files on the CD,
4.If the Setup Assistant still does not start, reference the section titled “Manually Configuring Network Settings” (page 67) of this User Manual for an alternative setup method)..
1.If the Setup Assistant is not able to find the Router during the installation process, there may be
Examples of
2.Unplug power to the Router for 10 seconds, and then plug the power back into the Router.. Ensure that the Router’s “router” LED is on; it should be solid BLUE.. If not, check to make sure that the AC adapter is connected to the Router and plugged into a wall outlet..
3.Ensure that you have a cable connected between the network (Ethernet) port on the back of the computer and one of the “to Wired Computers” ports on the back of the Router..
Setup Assistant cannot find my Router.
If the Setup Assistant is not able to find the Router during the installation process, please check the following items:
Note: The computer should NOT be connected to the port labeled “to Modem” on the back of the Router..
4.Try shutting down and restarting your computer, then rerunning the Setup Assistant..
If the Setup Assistant is still unable to find the Router, reference the section titled “Manually Configuring Network Settings” for installation steps..
N+ Wireless Router | 73 |