Using the Web-Based Advanced User Interface
Table of Contents | sections | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
Setting WPA/WPA2-Personal (PSK)
Like WPA security, WPA2 is available in both WPA2-Personal (PSK) mode and WPA2-Enterprise (RADIUS) mode.. Typically, WPA2-Personal (PSK) is the mode that will be used in a home environment, while WPA2- Enterprise (RADIUS) is implemented in a business environment where an external radius server distributes the network key to the clients automatically.. Your Router supports WPA2-Personal (PSK)..
1.After you’ve set up your Router, go to the “Security” page under “Wireless” and select “WPA-PSK(no server)” from the “Security Mode” drop-down menu..
2.For “Authentication”, select “WPA-PSK”, “WPA2-PSK”, or “WPA- PSK + WPA2-PSK”.. This setting will have to be identical on the wireless clients that you set up.. “WPA-PSK + WPA2-PSK” mode will allow the Router to support clients running either WPA or WPA2 security..
3.For “Encryption Technique” will auto-fill depending on the authentication type above.. This setting will have to be identical on the wireless clients that you set up..
4.Enter your pre-shared key (PSK).. This can be from eight to 63 characters and can be letters, numbers, or symbols.. This same key must be used on all of the wireless clients that you set up.. For example, your PSK might be something like: “Smith family network key”.. Click “Apply Changes” to finish.. You must now set all wireless clients to match these
settings.. | IMPORTANT: Make sure your wireless computers are updated to work |
|
| with WPA2 and have the correct settings to get proper connection to the |
| Router.. |