Belkin PM01522EA, F5D9631-4 user manual IP Address, Subnet Mask, Dhcp Server, IP Pool, Lease Time

Page 42

Using the Web-Based Advanced User Interface

Table of Contents

sections

1

2

3

4

5

6

7

8

9

10

1. IP Address

The “IP address” is the internal IP address of the Router. The default IP address is “192.168.2.1”. To access the advanced setup interface, type this IP address into the address bar of your browser. This address can be changed if needed. To change the IP address, type in the new IP address and click “Apply Changes”. The IP address you choose should be a non-routable IP. Examples of a non-routable IP are:

192.168.x.x (where x is anything between 0 and 255) 10.x.x.x (where x is anything between 0 and 255)

2. Subnet Mask

There is no need to change the subnet mask. This is a unique, advanced feature of your Belkin Router. It is possible to change the subnet mask if necessary; however, do NOT make changes to the subnet mask unless you have a specific reason to do so. The default setting is “255.255.255.0”.

3. DHCP Server

The DHCP server function makes setting up a network very easy by assigning IP addresses to each computer on the network automatically. The default setting is “On”. The DHCP server can be turned OFF if necessary; however, in order to do so you must manually set a static IP address for each computer on your network. To turn off the DHCP server, select “Off” and click “Apply Changes”.

4. IP Pool

The range of IP addresses set aside for dynamic assignment to the computers on your network. The default is 2–100 (99 computers). If you want to change this number, you can do so by entering a new starting and ending IP address and clicking on “Apply Changes”. The DHCP server can assign 100 IP addresses automatically. This means that you cannot specify an IP address pool larger than 100 computers. For example, starting at 50 means you have to end at 150 or lower so as not to exceed the 100-client limit. The starting IP address must be lower in number than the ending IP address.

5. Lease Time

The length of time the DHCP server will reserve the IP address for each computer. We recommend that you leave the lease time set to “Forever”. The default setting is “Forever”, meaning that any time a computer is assigned an IP address by the DHCP server, the IP address will not change for that particular computer. Setting lease times for shorter intervals such as one day or one hour frees IP addresses after the specified period of time. This also means that a particular computer’s IP address may change over time. If you have set any of the other advanced features of the Router such as DMZ or client IP filters, these are dependent on the IP address. For this reason, you will not want the IP address to change.

6. Local Domain Name (Optional)

The default setting is “Belkin”. You can set a local domain name (network name) for your network. There is no need to change this setting unless you have a specific advanced need to do so. You can name the network anything you want such as “MY NETWORK”.

G+ MIMO Wireless Modem Router

40

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Wireless Modem Router Table of Contents Advantages of a Wireless Network IntroductionRouter Placement Placement of your G+ Mimo Wireless Modem RouterImportant Factors for Placement and Setup IntroductionChoose the Quietest Channel for your Wireless Network Cordless PhonesSecure Connections, VPNs, and AOL Product Features Product OverviewProduct Overview Built-In Dynamic Host Configuration Protocol DhcpSetup Assistant Support for VPN Pass-ThroughKnowing your Modem Router System RequirementsInternet Connection Settings Knowing your Modem RouterKnowing your Router Router/Power Status Wireless-Computer StatusWired-Computer Status SecurityAdsl Line Status Internet StatusResetting the Router Connections to Wired Computers YellowReset Button Ii. Restoring the Factory DefaultsConnecting and Configuring your modem Router Connecting and Configuring your modem Router Brand-New SetupHardware Connections Replacing an Existing Modem or Modem Router Set Up the Router Run the Setup Assistant Software Select CountryConfirmation Screen Progress Screen Checking Settings Verifying Hardware Connections Naming your Wireless Network Requesting Internet Account Info if neededConfiguring the Router Checking Internet Connection Congratulations Troubleshooting Optional Assistance Connecting Other ComputersSet Up Wireless Security Run the Security Assistant Software Progress Screen Picking the Security Type Creating a Network Key Transferring the Key Verifying the Connection Congratulations Alternate Setup Method Hardware Connections Follow the Quick Installation GuideAlternate Setup Method Logging into the Router Logging out of the RouterUsing the Web-Based Advanced User Interface Understanding the Web-Based Advanced User InterfaceUsing the Web-Based Advanced User Interface Features LAN SettingsInternet Settings Adsl InfoConnection Type Setting your ISP Connection Type to PPPoE or PPPoA IP assigned by ISP For Dynamic IP connection Setting your ISP Connection Type to Static IP IPoA For Static IP connectionUsing the Web-Based Advanced User Interface Using the Web-Based Advanced User Interface Viewing the LAN Settings Changing LAN Settings Dhcp Server IP AddressSubnet Mask IP PoolConfiguring the Wireless Network Settings Viewing the Dhcp Client ListChanging the Wireless Network Name Ssid 802.11b & 802.11g Mode Changing the Wireless ChannelUsing the Wireless Mode Switch 802.11g ModeUsing the Broadcast Ssid Feature Protected Mode Switch 802.11e/WMM Wi-FiMultimedia QoSChanging the Wireless Security Settings Using Wi-Fi Protected Setup WPA2 Requirements Setting WPA/WPA2-Personal PSK Setting WPA Security Setting WPA-PSKSetting WEP Encryption Using a Hexadecimal Key Setting MAC Address ControlUsing the Web-Based Advanced User Interface Configuring the Firewall Configuring Internal Forwarding Settings Manually Entering Settings into the Virtual ServerChoosing an Application Setting Client IP Filters Setting MAC Address Filtering Enabling the Demilitarized Zone DMZUsing Dynamic DNS Setting up the Router’s Dynamic DNS Update ClientUtilities Restarting the Router to Restore Normal Operation Restarting the RouterRestoring Factory Default Settings Saving a Current Configuration Using the Web-Based Advanced User Interface Restoring a Previous Configuration Using the Web-Based Advanced User Interface Updating the Firmware Checking for a New Version of FirmwareDownloading a New Version of Firmware Using the Web-Based Advanced User Interface Updating the Router’s Firmware Using the Web-Based Advanced User Interface Changing System Settings Setting or Changing the Administrator PasswordChanging the Login Time-Out Setting Setting the Time and Time Zone Enabling Remote ManagementEnabling/Disabling Auto Firmware Update Enabling/Disabling UPnPManually Configuring Network Settings Manually Configuring Network Settings in Mac OS up toManually Configuring Network Settings Manually Configuring Network Adapters in Mac OS XManually Configuring Network Settings Obtain DNS server address automatically 3. Click OK Manually Configuring Network Adapters in Windows 98 or Me Recommended Web Browser Settings Microsoft Internet Explorer 4.0 or HigherRecommended Web Browser Settings Netscape Navigator 4.0 or HigherTroubleshooting ProblemSolution Troubleshooting Setup Assistant cannot find my Router Setup Assistant cannot connect my Router to the Internet Troubleshooting Can’t connect to the Internet wirelessly Troubleshooting Troubleshooting How do I extend the range of my wireless network? C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key Troubleshooting Do Belkin products support WPA? Troubleshooting Troubleshooting Enabling WPA-PSK Mimo N1 Mimo Technical Support Local rates applyInformation Europe-European Union NoticeInformation How state law relates to the warranty Restricted Use in Certain Countries

F5D9631-4, PM01522EA specifications

The Belkin PM01522EA, also known as F5D9631-4, is a cutting-edge wireless router designed to meet the connectivity demands of modern households and small offices. With a sleek and compact design, this router is not only functional but also aesthetically pleasing, fitting seamlessly into a variety of environments.

One of the standout features of the F5D9631-4 is its dual-band technology, which operates on both 2.4GHz and 5GHz frequencies. This dual-band functionality allows for greater flexibility and reduced interference, enabling users to connect multiple devices simultaneously without compromising speed. The 2.4GHz band is ideal for everyday activities like browsing and streaming, while the 5GHz band is optimized for high-bandwidth tasks such as online gaming and HD video streaming.

Equipped with advanced wireless standards, the Belkin PM01522EA supports the 802.11n protocol, delivering wireless speeds of up to 300 Mbps. This high-speed capability ensures smooth and efficient data transmission, making it suitable for environments where multiple devices are used at once. The router's range is also impressive, providing extensive coverage that allows users to enjoy a strong and reliable connection throughout their home or office.

Security is a priority for Belkin, and the F5D9631-4 is no exception. It features WPA/WPA2 encryption, which safeguards personal and sensitive information from unauthorized access. The router also incorporates a built-in firewall, adding an extra layer of protection against external threats.

In terms of connectivity, the F5D9631-4 comes equipped with four Ethernet ports, allowing for wired connections to devices such as computers, gaming consoles, and smart TVs. This provides users with the option of enhanced stability and speed for those devices that require a more robust connection.

The setup process of the Belkin PM01522EA is user-friendly and straightforward, often requiring little more than following on-screen instructions. Additionally, the router supports remote management, enabling users to monitor and control their network settings conveniently from anywhere.

In summary, the Belkin PM01522EA, F5D9631-4 is a versatile and efficient wireless router that caters to the needs of modern connectivity. With its dual-band functionality, high-speed performance, robust security features, and straightforward setup, it is an excellent choice for anyone looking to enhance their internet experience at home or in a small office environment.
Top Page Image Contents