Belkin F5D9631-4 Cordless Phones, Choose the Quietest Channel for your Wireless Network

Page 5

Introduction

Table of Contents

sections

1

2

3

4

5

6

7

8

9

10

3. Cordless Phones

If the performance of your wireless network is impaired after attending to the above issues, and you have a cordless phone:

•Try moving cordless phones away from your Router and your wireless-enabled computers.

•Unplug and remove the battery from any cordless phone that operates on the 2.4GHz band (check manufacturer’s information). If this fixes the problem, your phone may be interfering.

•If your phone supports channel selection, change the channel on the phone to the farthest channel from your wireless network. For example, change the phone to channel 1 and move your Router to channel 11. See your phone’s user manual for detailed instructions.

•If necessary, consider switching to a 900MHz or 5GHz cordless phone.

4. Choose the “Quietest” Channel for your Wireless Network

In locations where homes or offices are close together, such as apartment buildings or office complexes, there may be wireless networks nearby that can conflict with yours.

Use the Site Survey capabilities found in the Wireless Utility of your wireless adapter to locate any other wireless networks that are available (see your wireless adapter’s user manual), and move your Router and computers to a channel as far away from other networks as possible.

•Experiment with more than one of the available channels, in order to find the clearest connection and avoid interference from neighboring cordless phones or other wireless devices.

•For Belkin wireless networking products, use the detailed Site Survey and wireless channel information included with your wireless network card. See your network card’s user guide for more information.

These guidelines should allow you to cover the maximum possible area with your Router. Should you need to cover an even wider area, we suggest the Belkin Wireless Universal Range Extender/Access Point.

G+ MIMO Wireless Modem Router

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Wireless Modem Router Table of Contents Introduction Advantages of a Wireless NetworkImportant Factors for Placement and Setup Placement of your G+ Mimo Wireless Modem RouterRouter Placement IntroductionCordless Phones Choose the Quietest Channel for your Wireless NetworkSecure Connections, VPNs, and AOL Product Overview Product FeaturesSetup Assistant Built-In Dynamic Host Configuration Protocol DhcpProduct Overview Support for VPN Pass-ThroughSystem Requirements Knowing your Modem RouterKnowing your Modem Router Internet Connection SettingsKnowing your Router Wired-Computer Status Wireless-Computer StatusRouter/Power Status SecurityInternet Status Adsl Line StatusReset Button Connections to Wired Computers YellowResetting the Router Ii. Restoring the Factory DefaultsConnecting and Configuring your modem Router Hardware Connections Connecting and Configuring your modem RouterBrand-New Setup Replacing an Existing Modem or Modem Router Select Country Set Up the Router Run the Setup Assistant SoftwareConfirmation Screen Progress Screen Checking Settings Verifying Hardware Connections Requesting Internet Account Info if needed Naming your Wireless NetworkConfiguring the Router Checking Internet Connection Congratulations Optional Assistance Connecting Other Computers TroubleshootingSet Up Wireless Security Run the Security Assistant Software Progress Screen Picking the Security Type Creating a Network Key Transferring the Key Verifying the Connection Congratulations Hardware Connections Follow the Quick Installation Guide Alternate Setup MethodLogging into the Router Logging out of the Router Alternate Setup MethodUnderstanding the Web-Based Advanced User Interface Using the Web-Based Advanced User InterfaceUsing the Web-Based Advanced User Interface Internet Settings LAN SettingsFeatures Adsl InfoConnection Type Setting your ISP Connection Type to PPPoE or PPPoA IP assigned by ISP For Dynamic IP connection For Static IP connection Setting your ISP Connection Type to Static IP IPoAUsing the Web-Based Advanced User Interface Using the Web-Based Advanced User Interface Viewing the LAN Settings Changing LAN Settings Subnet Mask IP AddressDhcp Server IP PoolViewing the Dhcp Client List Configuring the Wireless Network SettingsChanging the Wireless Network Name Ssid Using the Wireless Mode Switch Changing the Wireless Channel802.11b & 802.11g Mode 802.11g ModeChanging the Wireless Security Settings Using the Broadcast Ssid Feature Protected Mode Switch802.11e/WMM Wi-FiMultimedia QoS Using Wi-Fi Protected Setup WPA2 Requirements Setting WPA/WPA2-Personal PSK Setting WPA-PSK Setting WPA SecuritySetting WEP Encryption Setting MAC Address Control Using a Hexadecimal KeyUsing the Web-Based Advanced User Interface Configuring the Firewall Choosing an Application Configuring Internal Forwarding SettingsManually Entering Settings into the Virtual Server Setting Client IP Filters Enabling the Demilitarized Zone DMZ Setting MAC Address FilteringSetting up the Router’s Dynamic DNS Update Client Using Dynamic DNSUtilities Restarting the Router Restarting the Router to Restore Normal OperationRestoring Factory Default Settings Saving a Current Configuration Using the Web-Based Advanced User Interface Restoring a Previous Configuration Using the Web-Based Advanced User Interface Downloading a New Version of Firmware Updating the FirmwareChecking for a New Version of Firmware Using the Web-Based Advanced User Interface Updating the Router’s Firmware Using the Web-Based Advanced User Interface Changing the Login Time-Out Setting Changing System SettingsSetting or Changing the Administrator Password Enabling Remote Management Setting the Time and Time ZoneEnabling/Disabling UPnP Enabling/Disabling Auto Firmware UpdateManually Configuring Network Settings in Mac OS up to Manually Configuring Network SettingsManually Configuring Network Adapters in Mac OS X Manually Configuring Network SettingsManually Configuring Network Settings Obtain DNS server address automatically 3. Click OK Manually Configuring Network Adapters in Windows 98 or Me Microsoft Internet Explorer 4.0 or Higher Recommended Web Browser SettingsNetscape Navigator 4.0 or Higher Recommended Web Browser SettingsSolution TroubleshootingProblem Troubleshooting Setup Assistant cannot find my Router Setup Assistant cannot connect my Router to the Internet Troubleshooting Can’t connect to the Internet wirelessly Troubleshooting Troubleshooting How do I extend the range of my wireless network? C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key Troubleshooting Do Belkin products support WPA? Troubleshooting Troubleshooting Enabling WPA-PSK Mimo N1 Mimo Local rates apply Technical SupportEurope-European Union Notice InformationInformation How state law relates to the warranty Restricted Use in Certain Countries

F5D9631-4, PM01522EA specifications

The Belkin PM01522EA, also known as F5D9631-4, is a cutting-edge wireless router designed to meet the connectivity demands of modern households and small offices. With a sleek and compact design, this router is not only functional but also aesthetically pleasing, fitting seamlessly into a variety of environments.

One of the standout features of the F5D9631-4 is its dual-band technology, which operates on both 2.4GHz and 5GHz frequencies. This dual-band functionality allows for greater flexibility and reduced interference, enabling users to connect multiple devices simultaneously without compromising speed. The 2.4GHz band is ideal for everyday activities like browsing and streaming, while the 5GHz band is optimized for high-bandwidth tasks such as online gaming and HD video streaming.

Equipped with advanced wireless standards, the Belkin PM01522EA supports the 802.11n protocol, delivering wireless speeds of up to 300 Mbps. This high-speed capability ensures smooth and efficient data transmission, making it suitable for environments where multiple devices are used at once. The router's range is also impressive, providing extensive coverage that allows users to enjoy a strong and reliable connection throughout their home or office.

Security is a priority for Belkin, and the F5D9631-4 is no exception. It features WPA/WPA2 encryption, which safeguards personal and sensitive information from unauthorized access. The router also incorporates a built-in firewall, adding an extra layer of protection against external threats.

In terms of connectivity, the F5D9631-4 comes equipped with four Ethernet ports, allowing for wired connections to devices such as computers, gaming consoles, and smart TVs. This provides users with the option of enhanced stability and speed for those devices that require a more robust connection.

The setup process of the Belkin PM01522EA is user-friendly and straightforward, often requiring little more than following on-screen instructions. Additionally, the router supports remote management, enabling users to monitor and control their network settings conveniently from anywhere.

In summary, the Belkin PM01522EA, F5D9631-4 is a versatile and efficient wireless router that caters to the needs of modern connectivity. With its dual-band functionality, high-speed performance, robust security features, and straightforward setup, it is an excellent choice for anyone looking to enhance their internet experience at home or in a small office environment.
Top Page Image Contents